Mostrar el registro sencillo del ítem

Análisis de elementos finitos en acero inoxidable AISI 316L expuesto a la prueba de desgaste por deslizamiento en seco con bola sobre plano

dc.contributor.authorMartínez Londoño, Juan Carlos
dc.contributor.authorMartinez Trinidad, Jose Francisco
dc.contributor.authorGarcía León, Ricardo Andrés
dc.coverage.spatialColombiaen_US
dc.date.accessioned2025-10-27T13:51:08Z
dc.date.available2025-10-27T13:51:08Z
dc.date.issued2022-08-25
dc.identifier.issn0301-679Xen_US
dc.identifier.urihttps://repositorioinstitucional.ufpso.edu.co/xmlui/handle/20.500.14167/5948
dc.description.abstractEn este trabajo se presenta un modelo de análisis de elementos finitos mediante la implementación de la subrutina UMESHMOTION en el paquete de software ABAQUS, simulando el desgaste por deslizamiento en una configuración de bola sobre grasa en un AISI 316L. El modelo se basa en una técnica de remallado Lagrangiano-Euleriano (ALE) arbitrario que implementa una ecuación de Archard modificada. En el modelo, se implementaron funciones de forma y la formulación de Newton-Raphson para encontrar la presión de contacto y los valores de deslizamiento en la muestra y, por lo tanto, validar la profundidad de desgaste con los reportados en la literatura. Se desarrolló un análisis de independencia de malla, teniendo en cuenta el tamaño del elemento de contacto, la discretización en el número total de ciclos y el incremento máximo de paso. Se calculó la presión de contacto después de la carga inicial y se comparó con los valores encontrados por la formulación hertziana encontrados en la literatura con un error máximo del 8,61%. La profundidad de desgaste encontrada concordó bien con los valores reportados en la literatura, con un error máximo del 18,77%.en_US
dc.language.isoengen_US
dc.relationfile:///C:/Users/UFPSO/Downloads/80.pdfen_US
dc.titleAnálisis de elementos finitos en acero inoxidable AISI 316L expuesto a la prueba de desgaste por deslizamiento en seco con bola sobre planoen_US
dc.title.translatedFinite Element Analysis on AISI 316L Stainless Steel Exposed to Ball‑on‑Flat Dry Sliding Wear Testen_US
dc.contributor.cvlacRicardo Andrés García León [0001454975]en_US
dc.contributor.cvlacJuan Carlos Martínez Londoño [0001699305]en_US
dc.contributor.googlescholarJosé Francisco Martínez Trinidad [l2OsFsQAAAAJ]en_US
dc.contributor.googlescholarRicardo Andrés García León [emeJT3sAAAAJ]en_US
dc.contributor.googlescholarJuan Carlos Martínez Londoño [1TvRMwUAAAAJ]en_US
dc.contributor.orcidJuan Carlos Martínez Londoño [0009-0000-3678-7368]en_US
dc.contributor.orcidJosé Francisco Martínez Trinidad [0000-0001-7973-9075]en_US
dc.contributor.orcidRicardo Andrés García León [0000-0002-2734-1425]en_US
dc.contributor.researchgateJuan Carlos Martínez Londoño [Juan-Martinez-Londono]en_US
dc.contributor.researchgateJosé Francisco Martínez Trinidad [Jose-Francisco-Martinez-Trinidad]en_US
dc.contributor.researchgateRicardo Andrés García León [Ricardo-Garcia-Leon]en_US
dc.contributor.scopusJosé Francisco Martínez Trinidad [55993723900]en_US
dc.contributor.scopusRicardo Andrés García León [57192545232]en_US
dc.description.abstractenglishA fnite element analysis model is presented in this work by implementing the UMESHMOTION subroutine in the software suite ABAQUS, simulating the sliding wear in a confguration ball-on-fat on an AISI 316L. The model is based on an arbitrary Lagrangian–Eulerian (ALE) remeshing technique implementing a modifed Archard’s equation. In the model, shape functions and Newton–Raphson formulation were implemented to fnd the contact pressure and sliding values on the sample and thus validate the wear depth with those reported in the literature. A mesh independence analysis was developed, taking into account contact element size, discretization in the total number of cycles, and the maximum step increment. The contact pressure after the initial loading was calculated and compared with values found by Hertzian formulation found in the literature having a maximum error of 8.61%. Wear depth found was in good agreement with the values reported in the literature, with a maximum error of 18.77%.en_US
dc.subject.proposalDesgasteen_US
dc.subject.proposalFEMen_US
dc.subject.proposalAcero inoxidableen_US
dc.subject.proposalABAQUSen_US
dc.subject.proposalUMESHMOTIONen_US
dc.subject.keywordss Wearen_US
dc.subject.keywordsFEMen_US
dc.subject.keywordsStainless steelen_US
dc.subject.keywordsABAQUSen_US
dc.subject.keywordsUMESHMOTIONen_US
dc.publisher.facultyFacultad ingenieríasen_US
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTen_US
dc.relation.referencesI. M. Hutchings, Tribology: Friction and Wear of Engineering Materials, Edward Arn. London, 1992.en_US
dc.relation.referencesR. A. García-León, J. Martínez-Trinidad, I. Campos-Silva, U. Figueroa-López, and A. Guevara-Morales, “Wear maps of borided AISI 316L steel under ball-on-fat dry sliding conditions,” Mater. Lett., vol. 282, pp. 1–5 (128842), 2021, doi: https://doi.org/10. 1016/j.matlet.2020.128842en_US
dc.relation.referencesGarcía-León, R.A., Martínez-Trinidad, J., Guevara-Morales, A. et al. "Wear Maps and Statistical Approach of AISI 316L Alloy under Dry Sliding Conditions". J. of Materi Eng and Perform., vol. 30, pp. 6175–6190, 2021, doi. https://doi.org/10.1007/ s11665-021-05822-0en_US
dc.relation.referencesM. P. Ananth and R. Ramesh, “Analysis of sliding behaviour of non-conformal contacting surfaces subjected to shear traction,” Procedia Eng., vol. 38, pp. 2645–2656, 2012, doi: https://doi.org/ 10.1016/j.proeng.2012.06.311en_US
dc.relation.references] K. Holmberg, A. Laukkanen, H. Ronkainen, K. Wallin, S. Varjus, and J. Koskinen, “Tribological contact analysis of a rigid ball sliding on a hard coated surface. Part I: Modelling stresses and strains,” Surf. Coatings Technol., vol. 200, no. 12–13, pp. 3793–3809, 2006, doi: https://doi.org/10.1016/j.surfcoat.2005. 03.040en_US
dc.relation.referencesK. Holmberg and A. Matthews, Coatings Tribology: Properties, Mechanisms, Techniques and Applications in Surface Engineering, Elsevier. United Kingdom, 2009.en_US
dc.relation.referencesS. W. Hsu and K. C. Liao, “Wear analysis and verifcation of metallic terminals for electronic connectors,” Eng. Fail. Anal., vol. 25, pp. 71–80, 2012, doi: https://doi.org/10.1016/j.engfa ilanal.2012.04.010en_US
dc.relation.referencesA. P. S. Arunachalam and S. Idapalapati, “Material removal analysis for compliant polishing tool using adaptive meshing technique and Archard wear model,” Wear, vol. 418–419, pp. 140–150, 2019, doi: https://doi.org/10.1016/j.wear.2018.11.015.en_US
dc.relation.referencesV. Hegadekatte, N. Huber, and O. Kraft, “Modeling and simulation of wear in a pin on disc tribometer,” Tribol. Lett., vol. 24, no. 1, pp. 51–60, 2006, doi: https://doi.org/10.1007/s11249-006-9144-2.en_US
dc.relation.referencesB. Kanavalli, “Application of user defned subroutine UMESHMOTION in ABAQUS for simulating dry rolling/sliding wear,” p. 34, 2006en_US
dc.relation.referencesV. Hegadekatte, S. Kurzenhäuser, N. Huber, and O. Kraft, “A predictive modeling scheme for wear in tribometers,” Tribol. Int., vol. 41, no. 11, pp. 1020–1031, 2008, doi: https://doi.org/10.1016/j. triboint.2008.02.020.en_US
dc.relation.referencesI. R. McColl, J. Ding, and S. B. Leen, “Finite element simulation and experimental validation of fretting wear,” Wear, vol. 256, no. 11–12, pp. 1114–1127, Jun. 2004, doi: https://doi.org/10.1016/j. wear.2003.07.001.en_US
dc.relation.referencesK. K. Bose and P. Ramkumar, “Finite element method based sliding wear prediction of steel-on-steel contacts using extrapolation techniques,” Proc. Inst. Mech. Eng. Part J J. Eng. Tribol., vol. 233, no. 10, pp. 1446–1463, 2019, doi: https://doi.org/10.1177/ 1350650119836813.en_US
dc.relation.referencesDassault Systèmes, “Abaqus 6.12 Online Documentation,” Notes. 2012, doi: https://doi.org/10.1097/TP.0b013e31822ca79b.en_US
dc.relation.referencesDassault Systèmes Simulia, “Abaqus user subroutines,” Abaqus 6.12, vol. 53, no. 9, 2013en_US
dc.relation.referencesASM, “ASM Volume 1 Properties and Selection: Irons, Steels, and High-Performance Alloys,” 1990.en_US
dc.relation.referencesR. Liu and D. Y. Li, “Modifcation of Archard’s equation by taking account of elastic/pseudoelastic properties of materials,” Wear, vol. 250–251, no. PART 2, pp. 956–964, 2001, doi: https://doi. org/10.1016/s0043-1648(01)00711-6.en_US
dc.relation.references] K. Holmberg, H. Ronkainen, A. Laukkanen, K. Wallin, A. Erdemir, and O. Eryilmaz, “Tribological analysis of TiN and DLC coated contacts by 3D FEM modelling and stress simulation,” Wear, vol. 264, no. 9–10, pp. 877–884, 2008, doi: https://doi.org/ 10.1016/j.wear.2006.12.084.en_US
dc.relation.referencesJ. C. Martínez, L. V. Vanegas Useche, and M. A. Wahab, “Numerical prediction of fretting fatigue crack trajectory in a railway axle using XFEM,” Int. J. Fatigue, vol. 100, pp. 32–49, 2017, doi: https://doi.org/10.1016/j.ijfatigue.2017.03.009en_US
dc.relation.referencesM. Öqvist, “Numerical simulations of mild wear using updated geometry with diferent step size approaches,” Wear, vol. 249, no. 1–2, pp. 6–11, Apr. 2001, doi: https://doi.org/10.1016/S0043- 1648(00)00548-2.en_US
dc.relation.referencesA. Meneses-Amador et al., “Contact fatigue performance of cobalt boride coatings,” Surf. Coatings Technol., vol. 353, pp. 346–354, 2018, doi: https://doi.org/10.1016/j.surfcoat.2018.07.104en_US
dc.relation.referencesP. Põdra and S. Andersson, “Simulating sliding wear with fnite element method,” Tribol. Int., vol. 32, no. 2, pp. 71–81, 1999, doi: https://doi.org/10.1016/S0301-679X(99)00012-2en_US
dc.relation.referencesV. Saikko, “Efect of contact pressure on wear and friction of ultra-high molecular weight polyethylene in multidirectional sliding,” Proc. Inst. Mech. Eng. Part H J. Eng. Med., vol. 220, no. 7, pp. 723–731, 2006, doi: https://doi.org/10.1243/09544119JE IM146en_US
dc.relation.referencesA. Ravikiran and S. Jahanmir, “Efect of contact pressure and load on wear of alumina,” Wear, vol. 251, no. 1, pp. 980–984, 2001, doi: https://doi.org/https://doi.org/10.1016/S0043-1648(01) 00739-6.en_US
dc.relation.referencesA. Sánchez-Islas, J. Martínez-Trinidad, I. Campos-Silva, U. Figueroa-López, J. Martínez-Londoño, and R. A. García-León, “Dry Sliding Wear Test on Borided AISI 1018 Steel Under Pinon-Disc Confguration,” Metall. Mater. Trans. A Phys. Metall. Mater. Sci., vol. 53, no. 1, pp. 179–199, 2022, doi: https://doi. org/10.1007/s11661-021-06511-2en_US
dc.relation.referencesN. Ye and K. Komvopoulos, “Three-dimensional fnite element analysis of elastic-plastic layered media under thermomechanical surface loading,” J. Tribol., vol. 125, no. 1, pp. 52–59, 2003, doi: https://doi.org/10.1115/1.1497360.en_US
dc.relation.referencesA. Laukkanen et al., “Topographical orientation efects on surface stresses infuencing on wear in sliding DLC contacts, Part 2: Modelling and simulations,” Wear, vol. 388–389, pp. 18–28, 2017, doi: https://doi.org/10.1016/j.wear.2017.03.026en_US
dc.relation.referencesX. Zhang, K. Zhang, X. Kang, and L. Zhang, “Friction maps and wear maps of Ag/MoS2/WS2 nanocomposite with diferent sliding speed and normal force,” Tribol. Int., vol. 164, no. August, p. 107228, 2021, doi: https://doi.org/10.1016/j.triboint.2021.107228en_US
dc.relation.referencesG. Wang, G. Zhao, J. Song, and Q. Ding, “Efect of velocity and interference depth on the tribological properties of alumina sliding with Cu: A molecular dynamics simulation,” Chem. Phys. Lett., vol. 775, no. April, p. 138669, 2021, doi: https://doi.org/10.1016/j. cplett.2021.138669.en_US
dc.identifier.DOI10.1007/s12666-022-02720-4en_US


Ficheros en el ítem

Thumbnail
Nombre:
Análisis de elementos finitos ...
Tamaño:
4.795Mb
Formato:
PDF
Ver/

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem