Mostrar el registro sencillo del ítem

Efectos de la posición y el tamaño de los orificios de inyección de aire en la estructura de flujo de una cámara de combustión de vórtice atrapado

dc.contributor.authorMoreno Pacheco, Luis Alfonso
dc.contributor.authorBarbosa Saldaña, Juan Gabriel
dc.contributor.authorLópez Jarquín, Edgar Geovany
dc.contributor.authorMartínez Trinidad, José
dc.contributor.authorGarcía León, Ricardo Andrés
dc.contributor.authorToledo Velázquez, Miguel
dc.coverage.spatialColombiaen_US
dc.date.accessioned2025-10-06T15:58:30Z
dc.date.available2025-10-06T15:58:30Z
dc.date.issued2025-03-20
dc.identifier.issn2226-4310en_US
dc.identifier.urihttps://repositorioinstitucional.ufpso.edu.co/xmlui/handle/20.500.14167/5664
dc.description.abstractLa eficiencia de la combustión y la estabilización de la llama son dos parámetros fundamentales en el diseño de los combustores según las políticas medioambientales actuales impuestas a la industria de la aviación comercial. Una alternativa para la estabilización de la llama y la alta eficiencia en el proceso de combustión en los combustores es el concepto de combustor de vórtice atrapado (TVC). Este estudio utiliza una simulación numérica para el flujo no reactivo con el fin de determinar la ubicación y el tamaño óptimos de los orificios de inyección para el flujo de aire suministrado a un TVC. Los resultados muestran dos estructuras de flujo de vórtice en la cavidad que cambian de tamaño e intensidad según la ubicación y el tamaño de los orificios de inyección. El comportamiento óptimo se obtiene con un conjunto de orificios de inyección de aire en la parte superior de la pared delantera de la cavidad, en combinación con un segundo conjunto situado en la parte inferior de la pared trasera.en_US
dc.language.isoengen_US
dc.relationhttps://www.mdpi.com/2226-4310/12/3/264en_US
dc.titleEfectos de la posición y el tamaño de los orificios de inyección de aire en la estructura de flujo de una cámara de combustión de vórtice atrapadoen_US
dc.title.translatedEffects of the position and size of air injection holes on the flow structure of a trapped vortex combustion chamberen_US
dc.contributor.cvlacRicardo Andrés García León [0001454975]en_US
dc.contributor.googlescholarLuis Alfonso Moreno Pacheco [YlG3DnQAAAAJ]en_US
dc.contributor.googlescholarJuan Gabriel Barbosa Saldaña [LLYVUyQAAAAJ]en_US
dc.contributor.googlescholarJosé Martínez Trinidad [l2OsFsQAAAAJ]en_US
dc.contributor.googlescholarRicardo Andrés García León [emeJT3sAAAAJ]en_US
dc.contributor.orcidLuis Alfonso Moreno Pacheco [0000-0001-8723-8836]en_US
dc.contributor.orcidJuan Gabriel Barbosa Saldaña [0000-0001-8590-8082]en_US
dc.contributor.orcidJosé Martínez Trinidad [0000-0002-5445-2681]en_US
dc.contributor.orcidRicardo Andrés García León [0000-0002-2734-1425]en_US
dc.contributor.researchgateRicardo Andrés García León [Ricardo-Garcia-Leon]
dc.contributor.scopusLuis Alfonso Moreno Pacheco [23976809300]en_US
dc.contributor.scopusJuan Gabriel Barbosa Saldaña [22950055000]en_US
dc.contributor.scopusJosé Martínez Trinidad [8432492800]en_US
dc.contributor.scopusRicardo Andrés García León [57192545232]en_US
dc.contributor.scopusMiguel Toledo Velázquez [6507836226]en_US
dc.description.abstractenglishCombustion efficiency and flame stabilization are two main parameters in combustor design according to current environmental policies imposed on the commercial aviation industry. An alternative for flame stabilization and high efficiency in the combustion process in combustors is the trapped-vortex combustor (TVC) concept. This study uses a numerical simulation for non-reactive flow to determine the optimal location and size of the injection holes for the airflow supplied to a TVC. The results show two vortex flow structures in the cavity that change in size and intensity according to the allocation and size of the injection holes. The optimal behavior is obtained with a set of air injection holes at the top fore wall of the cavity in combination with a second set located at the bottom of the rear wall.en_US
dc.subject.proposalCavidad de vórtice atrapadoen_US
dc.subject.proposalCombustoresen_US
dc.subject.proposalFlujo no reactivoen_US
dc.subject.proposalSimulación numéricaen_US
dc.subject.proposalModelo κ−εen_US
dc.subject.proposalOrificios de inyección de aireen_US
dc.subject.keywordsTrapped-vortex cavityen_US
dc.subject.keywordsCombustorsen_US
dc.subject.keywordsNon-reactive flowen_US
dc.subject.keywordsNumerical simulationen_US
dc.subject.keywordsκ−ε Modelen_US
dc.subject.keywordsAir injection holesen_US
dc.publisher.facultyFacultad ingenieríasen_US
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTen_US
dc.relation.referencesJin, Y.; Li, Y.; He, X.; Zhang, J.; Jiang, B.; Wu, Z.; Song, Y. Experimental investigations of flow field and combustion characteristics of a model trapped vortex combustor. Appl. Energy 2014, 134, 257–269. [CrossRef]en_US
dc.relation.referencesXing, F.; Zhang, S.; Wang, P.; Fan, W. Experimental investigation of a single trapped-vortex combustor with a slight temperature raise. Aerosp. Sci. Technol. 2010, 14, 520–525. [CrossRef]en_US
dc.relation.referencesJin, Y.; He, X.; Zhang, J.; Jiang, B.; Wu, Z. Experimental study on emission performance of an LPP/TVC. Chin. J. Aeronaut. 2012, 25, 335–341. [CrossRef]en_US
dc.relation.referencesSinghal, A.; Ravikrishna, R.V. Single cavity trapped vortex combustor dynamics-Part 1: Experiments. Int. J. Spray Combust. Dyn. 2011, 3, 23–44. [CrossRef]en_US
dc.relation.referencesKatta, V.R.; Roquemore, W.M. Numerical studies on trapped-vortex concepts for stable combustión. In Proceedings of the ASME-Turbo Asia Conference, Jakarta, Indonesia, 5–7 November 1996.en_US
dc.relation.referencesLi, M.; He, X.; Zhao, Y.; Jin, Y.; Yao, K.; Ge, Z. Performance enhancement of a trapped-vortex combustor for gas turbine engines using a novel hybrid-atomizer. Appl. Energy 2018, 216, 286–295. [CrossRef]en_US
dc.relation.referencesEzhil Kumar, P.K.; Mishra, D.P. Numerical simulation of cavity flow structure in an axisymmetric trapped vortex combustor. Aerosp. Sci. Technol. 2012, 21, 16–23. [CrossRef]en_US
dc.relation.referencesZhu, Y.; Jin, Y.; He, X. Effects of location and angle of primary injection on the cavity flow structure of a trapped vortex combustor model. Optik 2019, 180, 699–712. [CrossRef]en_US
dc.relation.referencesZhang, R.C.; Hao, F.; Fan, W.J. Combustion and stability characteristics of ultra-compact combustor using cavity for gas turbines. Appl. Energy 2018, 225, 940–954. [CrossRef]en_US
dc.relation.referencesZhang, R.; Fan,W. Experimental study of entrainment phenomenon in a trapped vortex combustor. Chin. J. Aeronaut. 2013, 26, 63–73. [CrossRef]en_US
dc.relation.referencesSinghal, A.; Ravikrishna, R.V. Single cavity trapped vortex combustor dynamics-Part 2: Simulations. Int. J. Spray Combust. Dyn. 2011, 3, 45–62. [CrossRef]en_US
dc.relation.referencesZhao, D.; Gutmark, E.; Goey, P. A review of cavity-based trapped vortex, ultra-compact, high-g, inter-turbine combustors. Prog. Energy Combust. Sci. 2018, 66, 42–82. [CrossRef]en_US
dc.relation.referencesXing, F.; Wang, P.; Zhang, S.; Zou, J.; Zheng, Y.; Zhang, R.; Fan, W. Experiment and simulation study on lean blow-out of trapped vortex combustor with various aspect ratios. Aerosp. Sci. Technol. 2012, 18, 48–55. [CrossRef]en_US
dc.relation.referencesLiu, Y.Y.; Li, R.M.; Liu, H.X.; Yang, M.L. Effects of Fueling Scheme on the Performance of a Trapped Combustor Rig. In Proceedings of the 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Denver, CO, USA, 2–5 August 2009.en_US
dc.relation.referencesEzhil Kumar, P.K.; Mishra, D.P. Flame Stability Characteristics of Two-Dimensional Trapped Vortex Combustor. Combust. Sci. Technol. 2016, 188, 1283–1302. [CrossRef]en_US
dc.relation.referencesEzhil Kumar, P.K.; Mishra, D.P. Numerical study of reacting flow characteristics of a 2D twin cavity trapped vortex combustor. Combust. Theory Model. 2017, 21, 658–676. [CrossRef]en_US
dc.relation.referencesGuo, Y.; Gong, C.; Huang, Y.; Duan, F.; He, X. Combustion and emission performance of swirling-flow single trapped vortex combustor. Appl. Therm. Eng. 2017, 236, 121678. [CrossRef]en_US
dc.relation.referencesZhao, Y.; Gong, C.; Li, M. Effect of air-injection mode on mainstream-forced entrainment and combustion characteristics of a cavity-based combustor. Phys. Fluids 2024, 36, 087128. [CrossRef]en_US
dc.relation.referencesSharifzadeh, R.; Afshari, A. Numerical investigation of flow field effects on fuel–air mixing in a non-reacting trapped vortex combustor with different injection arrangements. Eur. J. Mech./B Fluids 2020, 82, 106–122. [CrossRef]en_US
dc.relation.referencesBurrus, D.L.; Roquemore, W.M.; Johnson, A.W.; Shouse, D.T. Performance Assessment of a Prototype Trapped Vortex Combustor Concept for Gas Turbine Application. In Proceedings of the ASME-IGTI, New Orleans, LA, USA, 4–7 June 2001.en_US
dc.relation.referencesRoquemore, W.; Shouse, D.; Burrus, D.; Johnson, A.; Cooper, C.; Duncan, B.; Hsu, K.-Y.; Katta, V.; Sturgess, G.; Vihinen, I. Trapped vortex combustor concept for gas turbine engines. In Proceedings of the 39th Aerospace Sciences Meeting and Exhibit, Reno, NV, USA, 8–11 January 2001. [CrossRef]en_US
dc.relation.referencesZhang, R.; Fan,W.; Shi, Q.; Tan,W. Structural design and performance experiment of a single vortex combustor with single-cavity and air blast atomisers. Aerosp. Sci. Technol. 2014, 39, 95–108. [CrossRef]en_US
dc.relation.referencesMishra, D.P.; Sudharshan, R. Numerical analysis of fuel-air mixing in a two-dimensional trapped vortex combustor. Proc. Inst. Mech. Eng. Part G J. Aerosp. Eng. 2010, 224, 65–75. [CrossRef]en_US
dc.relation.referencesReddy, J.N.; Anand, N.K.; Roy, P. Finite Element and Finite Volume Methods for Heat Transfer and Fluid Dynamics; Cambridge University Press: Cambridge, UK, 2023.en_US
dc.relation.referencesRoache, P.J. Quantification of uncertainty in computational fluid dynamics. Annu. Rev. Fluid Mech. 1997, 29, 123–160. [CrossRef]en_US
dc.relation.referencesCelik, I.B.; Ghia, U.; Roache, P.J.; Freitas, C.J.; Coleman, H.; Raad, P.E. Procedure for estimation and reporting of uncertainty due to discretization in CFD applications. J. Fluids Eng. Trans. ASME 2008, 130, 0780011–0780014. [CrossRef]en_US
dc.relation.referencesJin, Y.; He, X.; Zhang, J.; Jiang, B.; Wu, Z. Numerical investigation on flow structures of a laboratory-scale trapped vortex combustor. Appl. Therm. Eng. 2014, 66, 318–327. [CrossRef]en_US
dc.relation.referencesLi, M.; He, X.; Zhao, Y.; Jin, Y.; Ge, Z.; Sun, Y. Dome structure effects on combustion performance of a trapped vortex combustor. Appl. Energy 2017, 208, 72–82. [CrossRef]en_US
dc.relation.referencesVengadesan, Y.; Sony, C. Enhanced vortex stability in trapped vortex combustor. Aeronaut. J. 2010, 114, 333–337.en_US
dc.relation.referencesLefebvre, A.H.; Ballal, D.R. Gas Turbine Combustions: Alternative Fuels and Emissions; CRC Press: Boca Raton, FL, USA, 2010.en_US
dc.relation.referencesAgarwal, K.K.; Ravikrishna, R.V. Experimental and numerical studies in a compact trapped vortex combustor: Stability assessment and augmentation. Combust. Sci. Technol. 2011, 183, 1308–1327. [CrossRef]en_US
dc.relation.referencesZhan, J.M.; Li, Y.T.; Onyx Wai, W.H.; Hu, W.Q. Comparison between the Q criterion and Rortex in the application of an in-stream structure. Phys. Fluids 2019, 31, 121701-1–121701-7. [CrossRef]en_US
dc.relation.referencesElliott, G.S.; Samimy, M. Compressibility effects in free shear layers. Phys. Fluids A 1990, 2, 1231–1240. [CrossRef]en_US
dc.identifier.DOIhttps://doi.org/10.3390/aerospace12030264en_US


Ficheros en el ítem

Thumbnail
Nombre:
Efectos de la posición y el ...
Tamaño:
14.03Mb
Formato:
PDF
Ver/

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem