Show simple item record

dc.contributor.authorArrieta Gonzalez, Carlos Ernesto
dc.contributor.authorYepes Tumay, Hernando Alexander
dc.contributor.authorAmell Arrieta, Andres
dc.coverage.spatialColombiaen_US
dc.date.accessioned2026-04-10T13:18:38Z
dc.date.available2026-04-10T13:18:38Z
dc.date.issued2019-06-01
dc.identifier.issn1742-6588en_US
dc.identifier.urihttps://repositorioinstitucional.ufpso.edu.co/xmlui/handle/20.500.14167/6184
dc.description.abstractEl objetivo de este artículo es investigar los efectos de la sustitución del gas natural por gases sintéticos en la estabilidad de la combustión y los contaminantes de combustión de un quemador de combustión con superficie estabilizada. Se evaluaron tres gases sintéticos con un alto contenido en hidrógeno, que oscilaba entre el 60 % y el 75 % de H₂. El estudio experimental se llevó a cabo en diferentes condiciones de potencia de entrada (de 300 a 500 kW/m²) y relaciones de equivalencia. Los resultados obtenidos en este trabajo indican que la estabilidad de la combustión del gas natural en un quemador de combustión de superficie estabilizada se ve significativamente afectada por la adición de gases sintéticos, que en este caso se mantuvo constante para obtener mezclas equimolares de gas sintético y gas natural. Este resultado parece explicarse por las variaciones de algunas propiedades importantes de la combustión, principalmente la velocidad de combustión laminar y la temperatura adiabática de la llama. Por otra parte, se observó que las emisiones de CO disminuyen ligeramente al aumentar la concentración de H2. Este comportamiento se atribuye al aumento del radical OH.en_US
dc.language.isoengen_US
dc.relationhttps://iopscience.iop.org/article/10.1088/1742-6596/1257/1/012018/metaen_US
dc.titleEstudio experimental sobre la estabilidad de la combustión y las características de las emisiones de un quemador de combustión con superficie estabilizada alimentado con mezclas de gas natural y gas de síntesisen_US
dc.title.translatedAn experimental study of combustion stability and emissions characteristics of a surface-stabilized combustion burner fueled with natural gas-syngas blendsen_US
dc.contributor.cvlacCarlos Ernesto Arrieta Gonzalez(0001435094)en_US
dc.contributor.cvlacHernando Alexander Yepes Tumay(0001229087)en_US
dc.contributor.cvlacAndres Amell Arrieta(0000039829)en_US
dc.contributor.googlescholarCarlos Ernesto Arrieta Gonzalez(NLn9xE8AAAAJ)en_US
dc.contributor.googlescholarHernando Alexander Yepes Tumay(sev_U34AAAAJ)en_US
dc.contributor.googlescholarAndres Amell Arrieta(V48mCMgAAAAJ)en_US
dc.contributor.orcidCarlos Ernesto Arrieta Gonzalez(0000-0003-0839-6102)en_US
dc.contributor.orcidHernando Alexander Yepes Tumay(0000-0001-9399-5673)en_US
dc.contributor.orcidAndres Amell Arrieta(0000-0003-4473-4105)en_US
dc.contributor.researchgateHernando Alexander Yepes Tumay(Hernando-Yepes)en_US
dc.contributor.scopusCarlos Ernesto Arrieta Gonzalez(59158098500)en_US
dc.contributor.scopusHernando Alexander Yepes Tumay(55675200900)en_US
dc.contributor.scopusAndres Amell Arrieta(14833836200)en_US
dc.description.abstractenglishThe aim of this paper is to investigate the effects of replacing natural gas with synthetic gases on the combustion stability and the combustion pollutants of a surface-stabilized combustion burner. We evaluated three synthetic gases with high hydrogen contents ranging from 60% H2 to 75% H2. The experimental study was carried out under different input power conditions (300 to 500 kW/m2) and equivalence ratios. The results obtained in this work indicate that combustion stability of natural gas in a surface-stabilized combustion burner is significantly affected by the addition of synthetic gases, which in this case was held constant to obtained equimolar mixtures of synthetic gas and natural gas. This result seems to be explained by the variations of some important combustion properties, mainly the laminar burning velocity and the adiabatic flame temperature. On the other hand, it was found that CO emissions slightly decrease with increasing H2 concentration. This behavior is attributed to the increase of the OH radical.en_US
dc.subject.proposalEmisionesen_US
dc.subject.proposalCombustiónen_US
dc.subject.proposalmezclas de gas naturalen_US
dc.subject.proposalEstudio experimentalen_US
dc.subject.keywordsEmissionsen_US
dc.subject.keywordsCombustiónen_US
dc.subject.keywordsnatural gas blendsen_US
dc.subject.keywordsExperimental studyen_US
dc.publisher.facultyFacultad ingenieríasen_US
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTDIVen_US
dc.relation.referencesZhang N, Liu J, Wang J and Zhao H 2018 On the laminar combustion characteristics of natural gas-syngasair mixtures Therm. Sci. 22 2077–2086en_US
dc.relation.referencesEchavarría J D and Arrieta A A 2017 Estudio del régimen de combustión sin llama ante la variación de la carga térmica Ingenieria y Ciencia 13 185–208en_US
dc.relation.referencesDelgado A, Villalba L and Mejia S 2014 Estudio comparativo del ciclo indicado de un motor diesel mediante simulación CFD y datos experimentales Revista UIS Ingenierias. 13 23–31en_US
dc.relation.referencesCasleton K H, Breault R W and Richards G A 2008 System Issues and Tradeoffs Associated with Syngas Production and Combustion Combustion Science Technology 180 1013–1052en_US
dc.relation.referencesGuo S, Nie R and Yu Z 2019 Syngas production from biomass gasification in China: A clean strategy for sustainable development Energy Sources, Part A Recovery, Utilization, and Environmental Effects 41 911– 917en_US
dc.relation.referencesGiles D E, Som S and Aggarwal S K 2006 NOx emission characteristics of counterflow syngas diffusion flames with airstream dilution Fuel 85 1729–1742en_US
dc.relation.referencesWang G, Tang P, Li Y, Xu J and Durst F 2019 Flame front stability of low calorific fuel gas combustion with preheated air in a porous burner Energy 170 1279–1288en_US
dc.relation.referencesEcheverri-Uribe C and Amell A A 2019 Experimental evaluation of the surface-stabilized combustion of a confined porous inert media burner Combustion Science Technology In Press 1–24en_US
dc.relation.referencesMujeebu M A, Abdullah M Z, Bakar M Z A, Mohamad A A, Muhad R M N and Abdullah M K 2009 Combustion in porous media and its applications – A comprehensive survey Journal Environmental Management 90 2287–2312en_US
dc.relation.referencesWu C-Y, Chen K-H and Yang S Y 2014 Experimental study of porous metal burners for domestic stove applications Energy Conversion Management 77 380–388en_US
dc.relation.referencesIsmail A K, Ibrahim N H, Shamsuddin K A, Abdullah M Z and Zubair M 2018 A practical approach in porous medium combustion for domestic application: A review IOP Conference Series Material Science Engineering 370 012004en_US
dc.relation.referencesArrieta C E, García A M and Amell A A 2017 Experimental study of the combustion of natural gas and high-hydrogen content syngases in a radiant porous media burner International Journal Hydrogen Energy 42 12669–12680en_US
dc.relation.referencesArrieta C E and Amell A A 2014 Combustion analysis of an equimolar mixture of methane and syngas in a surface-stabilized combustion burner for household appliances Fuel 137 11–20en_US
dc.relation.referencesHuang R, Cheng L, Qiu K, Zheng C and Luo Z 2016 Low-Calorific Gas Combustion in a Two-Layer Porous Burner Energy & Fuels 30 1364–1374en_US
dc.identifier.DOI10.1088/1742-6596/1257/1/012018en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record