Mostrar el registro sencillo del ítem

Estudio de los fluidos aceite-agua a través del sensor basado en la permitividad eléctrica del patrón de fluido

dc.contributor.authorHernández Cely, Marlon Mauricio
dc.contributor.authorRuiz Diaz, Carlos Mauricio
dc.coverage.spatialColombiaen_US
dc.date.accessioned2025-10-28T15:07:04Z
dc.date.available2025-10-28T15:07:04Z
dc.date.issued2020-06-01
dc.identifier.issn1657 -4583en_US
dc.identifier.urihttps://repositorioinstitucional.ufpso.edu.co/xmlui/handle/20.500.14167/5963
dc.description.abstractUn sensor basado en la permitividad eléctrica del fluido fue usado para análisis de las tomografías en los diferentes patrones que se presentan en flujo multifase aceite y agua (Liquido-Liquido). El estudio experimental fue realizado en un tubo de vidrio borosilicato de 25,4 [mm] de diámetro interno y 12 [m] de longitud. El sensor está formado por una malla de alambre con dos planos de 8 x 8 hilos, llamado sensor de malla de alambre (WMS). Los experimentos fueron efectuados con dos viscosidades diferentes de aceite, una con 200 [cP] y otra de 60 [cP] a 860 [kg / m3]de densidad con el tubo posicionado en la horizontal y levemente inclinado a + 5 grados, para variar la viscosidad del aceite fue usado un intercambiador de calor. El patrón de flujo multifase analizado fue anular, estratificado y disperso. Las tomografías obtenidas por la WMS fueron comparadas con una cámara de alta velocidad para la validación cualitativa de los resultados. Se usaron doce modelos de permitividad eléctrica para el estudio del régimen del fluido presente.en_US
dc.language.isospaen_US
dc.relationhttps://revistas.uis.edu.co/index.php/revistauisingenierias/article/view/10570/10686en_US
dc.titleEstudio de los fluidos aceite-agua a través del sensor basado en la permitividad eléctrica del patrón de fluidoen_US
dc.title.translatedStudy of oil-water fluids through of the sensor based on the electrical permittivity of the fluid patternen_US
dc.contributor.cvlacMarlon Mauricio Hernández Cely [0001354455]en_US
dc.contributor.cvlacCarlos Mauricio Ruiz Diaz [0001772117]en_US
dc.contributor.googlescholarMarlon Mauricio Hernández Cely [RQyKQW4AAAAJ]en_US
dc.contributor.googlescholarCarlos Mauricio Ruiz Diaz [x10qI0UAAAAJ]en_US
dc.contributor.orcidMarlon Mauricio Hernández Cely [0000-0001-7564-4044]en_US
dc.contributor.orcidCarlos Mauricio Ruiz Diaz [0000-0003-3836-9332]en_US
dc.contributor.researchgateMarlon Mauricio Hernández Cely [Marlon-Hernandez-Cely]en_US
dc.contributor.researchgateCarlos Mauricio Ruiz Diaz [Carlos-Mauricio-Ruiz-Diaz]en_US
dc.contributor.scopusMarlon Mauricio Hernández Cely [57195293394]en_US
dc.contributor.scopusCarlos Mauricio Ruiz Diaz [57326268000]en_US
dc.description.abstractenglishA sensor based on the electrical permittivity of the fluid was used to analyze the tomographies of the different patterns that appear in multiphase oil and water flow (Liquid-Liquid). The experimental study was carried out in a borosilicate glass tube with an internal diameter of 25.4 [mm] and length of 12 [m]. The sensor is made up of two 8 x 8 wire flat wire mesh called a wire mesh sensor (WMS). The experiments were carried out with two different oil viscosities, one with 200 [cP] and the other with 60 [cP] at 860 [kg / m3]density with the tube positioned horizontally and slightly inclined at + 5 degrees, to vary the viscosity of the oil, a heat exchanger was used. The analyzed multiphase flow pattern was annular, stratified and dispersed. The tomographies obtained by the WMS were compared with a high- speed camera for the qualitative validation of the results. Twelve models of electrical permittivity were used to study the current fluid regime.en_US
dc.subject.proposalWMSen_US
dc.subject.proposalMultifaseen_US
dc.subject.proposalTomografíaen_US
dc.subject.proposalPermitividaden_US
dc.subject.proposalPatrón de flujoen_US
dc.subject.keywordsWMSen_US
dc.subject.keywordsMultiphaseen_US
dc.subject.keywordsTomographyen_US
dc.subject.keywordsPermittivityen_US
dc.subject.keywordsFlow patternen_US
dc.publisher.facultyFacultad ingenieríasen_US
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTen_US
dc.relation.referencesM. M. Hernández Cely, V. E. C. Baptistella, O. M. H. Rodriguez, “Study and characterization of gas-liquid slug flow in an annular duct, using high speed video camera, wire-mesh sensor and PIV,” Exp. Therm. Fluid Sci., vol. 98, no. May, pp. 563–575, 2018, doi: 10.1016/j.expthermflusci.2018.06.031en_US
dc.relation.referencesS. Arirachakaran, K. D. Oglesby, M. S. Malinowsky, O. Shoham, J. P. Brill, “An Analysis of Oil/Water Flow Phenomena in Horizontal Pipes”, en SPE Production Operations Symposium, Apr. 1989, doi: 10.2118/18836- MSen_US
dc.relation.referencesM. Nädler, D. Mewes, “Flow induced emulsification in the flow of two immiscible liquids in horizontal pipes,” Int. J. Multiph. Flow, vol. 23, no. 1, pp. 55-68, 1997, doi: 10.1016/S0301-9322(96)00055-9en_US
dc.relation.referencesP. Angeli, G. F. Hewitt, “Pressure gradient in horizontal liquid-liquid flows,” Int. J. Multiph. Flow, vol. 24, no. 7, pp. 1183–1203, 1998, doi: 10.1016/S0301- 9322(98)00006-8en_US
dc.relation.referencesO. M. H. Rodriguez, I. H. Rodriguez, J. L. Ansoni, “An experimental and numerical study on the wall lubrication force in dispersed liquid-liquid flow,” Int. J. Multiph. Flow, vol. 120, 2019, doi: 10.1016/j.ijmultiphaseflow.2019.103094en_US
dc.relation.referencesJ. Lovick, P. Angeli, “Experimental studies on the dual continuous flow pattern in oil-water flows,” Int. J. Multiph.Flow, vol. 30, no. 2, pp. 139–157, 2004, doi: 10.1016/j.ijmultiphaseflow.2003.11.011en_US
dc.relation.referencesK. Ioannou, O. J. Nydal, and P. Angeli, “Phase inversion in dispersed liquid-liquid flows,” Exp. Therm. Fluid Sci., vol. 29, no. 3, pp. 331–339, 2005, doi: 10.1016/j.expthermflusci.2004.05.003en_US
dc.relation.referencesJ. Y. L. Lum, T. Al-Wahaibi, P. Angeli, “Upward and downward inclination oil-water flows,” Int. J. Multiph. Flow, vol. 32, no. 4, pp. 413–435, 2006, doi: 10.1016/j.ijmultiphaseflow.2006.01.001.en_US
dc.relation.referencesH. F. Velasco Peña, A. Bonilla Riaño, C. H. Monteiro De Carvalho, V. Estevam, O. M. Hernandez Rodriguez, “Wire-mesh-based tomography in upward-vertical oil- water-air three-phase flow,” ICMF 2016, 2016.en_US
dc.relation.referencesM. Hernandez-cely, A. F. D. A. Teixeira, R. H. Ruschel, “Estimation of Permittivity Models for Holdup Measurement of Viscous-Oil for different patterns,” 2019 Int. Conf. Control. Autom. Diagnosis, pp. 1–6, 2019, doi: 10.1109 / ICCAD46983.2019.9037921en_US
dc.relation.referencesM. J. Da Silva, E. Schleicher, U. Hampel, “Capacitance wire-mesh sensor for fast measurement of phase fraction distributions,” Meas. Sci. Technol., vol. 18, no. 7, pp. 2245–2251, Jul. 2007.en_US
dc.relation.referencesI. H. Rodriguez, H. K. B. Yamaguti, M. S. de Castro, M. J. Da Silva, O. M. H. Rodriguez, “Slip ratio in dispersed viscous oil-water pipe flow,” Exp. Therm. Fluid Sci., vol. 35, no. 1, pp. 11–19, 2011, doi: 10.1016/j.expthermflusci.2010.07.017en_US
dc.relation.referencesO. M. H. Velasco Peña, H.F. Bonilla Riaño, A. Rodriguez, I.H. Rodríguez, “Evaluation of permittivity models for holdup measurement of viscous-oil in water dispersed flow,” in 8th International Conference on Multiphase Flow ICMF 2013, 2013, p. 2013.en_US
dc.relation.referencesI. D. Johnson, “Method and apparatus for measuring water in crude oil,” U.S. Pat. 4664263, 1987.en_US
dc.relation.referencesH. F. Velasco Peña, O. M. H. Rodriguez, “Applications of wire-mesh sensors in multiphase flows,” Flow Meas. Instrum., vol. 45, pp. 255–273, 2015, doi: 10.1016/j.flowmeasinst.2015.06.024en_US
dc.relation.referencesI. H. Rodriguez, H. F. Velasco Peña, A. Bonilla Riaño, R. A. W. M. Henkes, O. M. H. Rodriguez, “Experiments with a Wire-Mesh Sensor for stratified and dispersed oil-brine pipe flow,” Int. J. Multiph. Flow, vol. 70, pp. 113–125, 2015, doi: 10.1016/j.ijmultiphaseflow.2014.11.011en_US
dc.relation.referencesT. Frøystein, H. K. Kvandal, H. Aakre, “Dual energy gamma tomography system for high pressure multiphase flow,” Flow Meas. Instrum., vol. 16, no. 2–3, pp. 99–112, 2005, doi: 0.1016/j.flowmeasinst.2005.02.005en_US
dc.relation.referencesM. Appel, J. J. Freeman, D. Pusiol, “Robust multi- phase flow measurement using magnetic resonance technology,” SPE Middle East Oil Gas Show Conf. MEOS, Proc., vol. 2, no. January, pp. 932–951, 2011, doi: 10.2118/141465-MS.en_US
dc.relation.referencesY. Li et al., “Gas/oil/water flow measurement by electrical capacitance tomography,” Meas. Sci. Technol., vol. 24, no. 7, 2013, doi: 10.1088/0957- 0233/24/7/074001en_US
dc.relation.referencesB. Wang, Z. Gui, W. Tan, Z. Huang, H. Ji, H. Li, “A new dual-modality ECT/ERT technique based on C4D principle,” Conf. Rec. - IEEE Instrum. Meas. Technol. Conf., vol. 2015-July, pp. 2061–2065, 2015, doi: 10.1109/I2MTC.2015.7151600en_US
dc.relation.referencesH.-M. Prasser, A. Böttger, J. Zschau, “A new electrode-mesh tomograph for gas-liquid flows,” FLOW Meas. Instrum., vol. 9, no. 2, pp. 111–119, Jun. 1998, doi: 10.1016/S0955-5986(98)00015-6en_US
dc.relation.referencesH. Looyenga, “Dielectric constants of heterogeneous mixtures,” Physica, vol. 31, no. 3, pp. 401–406, 2002, doi: 10.1016/0031-8914(65)90045-5.en_US
dc.relation.referencesT. Hao, “Dielectric Properties of Non-aqueous Heterogeneous Systems,” Semental. Interface Sci., vol. 22, pp. 341 - 423, 2005.en_US
dc.identifier.DOIhttps://doi.org/10.18273/revuin.v19n3-2020017en_US


Ficheros en el ítem

Thumbnail
Nombre:
Estudio de los fluidos aceite-agua ...
Tamaño:
716.2Kb
Formato:
PDF
Ver/

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem