| dc.contributor.author | García León, Ricardo Andrés | |
| dc.contributor.author | Afanador García, Nelson | |
| dc.coverage.spatial | Colombia | en_US |
| dc.date.accessioned | 2025-10-16T12:54:50Z | |
| dc.date.available | 2025-10-16T12:54:50Z | |
| dc.date.issued | 2024-02-09 | |
| dc.identifier.issn | 2305-7084 | en_US |
| dc.identifier.uri | https://repositorioinstitucional.ufpso.edu.co/xmlui/handle/20.500.14167/5769 | |
| dc.description.abstract | En el presente trabajo, se obtuvieron espectros de estudio mediante espectroscopía fotoelectrónica de rayos X (XPS) de acero inoxidable AISI 316L borurado durante dos tiempos diferentes (1 y 6 h) de exposición a fluido corporal simulado (SBF) tras desgaste por deslizamiento en húmedo. Se obtuvo una capa borurada de ~39 micras sobre la superficie del acero inoxidable AISI 316L mediante tratamiento termoquímico de borurado. Como parte de la caracterización mecánica y química del desgaste por deslizamiento, se utilizaron ensayos de nanoindentación de Berkovich y espectroscopía de rayos X para determinar las principales propiedades de la capa borurada. Los resultados de los valores de la tasa de desgaste específico fueron mayores a una velocidad de deslizamiento de 5 mm/s que los registrados a 30 mm/s debido a la influencia del tiempo de exposición de la muestra y las combinaciones complejas de reacciones químicas con boro (p. ej., B2S3 , Cr2O3 y Fe2O3 ) en la superficie durante el deslizamiento durante 6 h de exposición en la solución de Hank debido a la formación de la película pasiva. El conocimiento de las especies químicas formadas durante las pruebas de desgaste por deslizamiento en húmedo en AISI 316L borurado es esencial para comprender los mecanismos de desgaste y el rendimiento de los materiales y optimizar las propiedades de los materiales y la confiabilidad de los materiales y componentes en la industria biomédica para tornillos y placas de fijación. | en_US |
| dc.language.iso | eng | en_US |
| dc.relation | https://www.mdpi.com/2305-7084/8/1/22 | en_US |
| dc.title | Especies químicas formadas en capas de FeB-Fe2B durante la prueba de desgaste por deslizamiento húmedo | en_US |
| dc.title.translated | Chemical species formed in FeB-Fe2B layers during wet sliding wear testing | en_US |
| dc.contributor.cvlac | Ricardo Andrés García León [0001454975] | en_US |
| dc.contributor.cvlac | Nelson Afanador García [0000226920] | en_US |
| dc.contributor.googlescholar | Ricardo Andrés García León [emeJT3sAAAAJ] | en_US |
| dc.contributor.googlescholar | Nelson Afanador García [8Uk1lqUAAAAJ] | en_US |
| dc.contributor.orcid | Ricardo Andrés García León [0000-0002-2734-1425] | en_US |
| dc.contributor.orcid | Nelson Afanador García [0000-0001-5463-2036] | en_US |
| dc.contributor.researchgate | Ricardo Andrés García León [Ricardo-Garcia-Leon] | |
| dc.contributor.scopus | Ricardo Andrés García León [57192545232] | en_US |
| dc.contributor.scopus | Nelson Afanador García [57202680756] | en_US |
| dc.description.abstractenglish | In the present work, X-ray photoelectron spectroscopy (XPS) survey spectra of borided
AISI 316L for two different times (1 and 6 h) of exposure to simulated body fluid (SBF) were obtained
after wet sliding wear. A borided layer of ~39 microns was obtained on the surface of the AISI
316L stainless steel using the thermochemical treatment of boriding. As part of the mechanical and
chemical characterization of sliding wear, Berkovich nanoindentation and X-ray spectroscopy tests
were used to determine the main properties of the borided layer. The results of the specific wear rate
values were higher at 5 mm/s sliding speed than those recorded at 30 mm/s due to the influence
of the exposure time of the sample and the complex combinations of chemical reactions with boron
(e.g., B2S3, Cr2O3, and Fe2O3) on the surface during the sliding during 6 h of exposure in Hank’s
solution due to the formation of the passive film. The knowledge of chemical species formed during
wet sliding wear tests on borided AISI 316L is essential for understanding wear mechanisms and
materials’ performance and optimizing material properties and materials’ and components’ reliability
in the biomedical industry for screws and fastening plates. | en_US |
| dc.subject.proposal | Desgaste | en_US |
| dc.subject.proposal | Lubricación | en_US |
| dc.subject.proposal | Especies químicas | en_US |
| dc.subject.proposal | Contacto mecánico | en_US |
| dc.subject.keywords | Wear | en_US |
| dc.subject.keywords | Lubrication | en_US |
| dc.subject.keywords | Chemical species | en_US |
| dc.subject.keywords | Mechanical contact | en_US |
| dc.publisher.faculty | Facultad ingenierías | en_US |
| dc.type.redcol | http://purl.org/redcol/resource_type/ART | en_US |
| dc.relation.references | Hanawa, T.; Hiromoto, S.; Yamamoto, A.; Kuroda, D.; Asami, K. XPS characterization of the surface oxide film of 316L stainless steel samples that were located in quasi-biological environments. Mater. Trans. 2002, 43, 3088–3092. [CrossRef] | en_US |
| dc.relation.references | Peruzzo, M.; Serafini, F.L.; Ordonez, M.F.C.; Souza, R.M.; Farias, M.C.M. Reciprocating sliding wear of the sintered 316L stainless steel with boron additions. Wear 2019, 422–423, 108–118. [CrossRef] | en_US |
| dc.relation.references | Davis, J.R. Mechanical Properties of Carbon and Alloy Steels. In Metals Handbook Desk Edition, 2nd ed.; CRC Press: Boca Raton, FL, USA, 1998. | en_US |
| dc.relation.references | García-León, R.A.; Martínez-Trinidad, J.; Campos-Silva, I. Historical Review on the Boriding Process using Bibliometric Analysis. Trans. Indian Inst. Met. 2021, 74, 541–557. [CrossRef] | en_US |
| dc.relation.references | Hutchings, I.; Shipway, P. Sliding Wear; Elsevier Ltd.: Amsterdam, The Netherlands, 2017. | en_US |
| dc.relation.references | Campos-Silva, I.; Palomar-Pardavé, M.; Pérez Pastén-Borja, R.; Kahvecioglu Feridun, O.; Bravo-Bárcenas, D.; López-García, C.; Reyes-Helguera, R. Tribocorrosion and cytotoxicity of FeB-Fe2B layers on AISI 316 L steel. Surf. Coat. Technol. 2018, 349, 986–997. [CrossRef] | en_US |
| dc.relation.references | ASTM-G119-09; Guide for Determining Synergism betweenWear and Corrosion. ASTM International: West Conshohocken, PA, USA, 2009. | en_US |
| dc.relation.references | Mejía-Caballero, I.; Palomar-Pardavé, M.; Martínez Trinidad, J.; Romero-Romo, M.; Pérez Pasten-Borja, R.; Lartundo-Rojas, L.; López-García, C.; Campos-Silva, I. Corrosion behavior of AISI 316L borided and non-borided steels immersed in a simulated body fluid solution. Surf. Coat. Technol. 2015, 280, 384–395. [CrossRef] | en_US |
| dc.relation.references | Kayali, Y.; Büyüksagis, A.; Yalcin, Y. Corrosion and Wear Behaviors of Boronized AISI 316L Stainless Steel. Met. Mater. Int. 2013, 19, 1053–1061. [CrossRef] | en_US |
| dc.relation.references | García-León, R.A.; Martínez-Trinidad, J.; Campos-Silva, I.; Figueroa-López, U.; Guevara-Morales, A. Development of tribological maps on borided AISI 316L stainless steel under ball-on-flat wet sliding conditions. Tribol. Int. 2021, 163, 107161. [CrossRef] | en_US |
| dc.relation.references | Acequisa 2018 Aceros y Equipos S.L. Aleación AISI 316L. Available online: https://acequisa.com/tipologia/inoxidablesespeciales- austeniticos-y-superausteniticos/ (accessed on 23 August 2022). | en_US |
| dc.relation.references | Campos-Silva, I.; Ortiz-Domínguez, M.; Tapia-Quintero, C.; Rodríguez-Castro, G.; Jiménez-Reyes, M.Y.; Chávez-Gutiérrez, E. Kinetics and boron diffusion in the FeB/Fe2B layers formed at the surface of borided high-alloy steel. J. Mater. Eng. Perform. 2012, 21, 1714–1723. [CrossRef] | en_US |
| dc.relation.references | ASTM-G133-05; Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear. ASTM International: West Conshohocken, PA, USA, 2016. | en_US |
| dc.relation.references | Mejía-Caballero, I. Evaluación de la Resistencia a la Corrosón en Aceros Aleados de Uso Industrial Endurecidos Por Difusión Superficial de Boro; Instituto Politecnico Nacional: Mexico City, Mexico, 2011. | en_US |
| dc.relation.references | Holmberg, K.; Matthews, A. Coatings Tribology: Properties, Mechanisms, Techniques and Applications in Surface Engineering; Elsevier: Oxford, UK, 2009. | en_US |
| dc.relation.references | Özbek, I.; Konduk, B.A.; Bindal, C.; Ucisik, A.H. Characterization of borided AISI 316L stainless steel implant. Vacuum 2002, 65, 521–525. [CrossRef] | en_US |
| dc.relation.references | Jurˇci, P.; Hudáková, M. Diffusion Boronizing of H11 Hot Work Tool Steel. J. Mater. Eng. Perform. 2011, 20, 1180–1187. [CrossRef] | en_US |
| dc.relation.references | Kunst, H.; Schaaber, O. Beobachtungen beim Oberflächenborieren von Stahl II-Über Wachstumsmechanismen und Aufbau der bei der Eindiffusion von Bor in Eisen bei Gegenwart von Kohlenstoff entstehenden Verbindungs- und Diffusionsschichten. Harterei-Tech. Mitt. 1967, 22, 131–140. | en_US |
| dc.relation.references | García-León, R.A.; Afanador-García, N.; Guerrero-Gómez, G. A Scientometric Review on Tribocorrosion in Hard Coatings. J. Bio-Tribo-Corrosion 2023, 9, 39. [CrossRef] | en_US |
| dc.relation.references | García-Léon, R.A.; Martínez-Trinidad, J.; Campos-Silva, I.;Wong-Angel,W. Mechanical characterization of the AISI 316L alloy exposed to boriding process. DYNA 2020, 87, 34–41. [CrossRef] | en_US |
| dc.relation.references | Taktak, S. Some mechanical properties of borided AISI H13 and 304 steels. Mater. Des. 2007, 28, 1836–1843. [CrossRef] | en_US |
| dc.relation.references | Reséndiz-Calderon, C.D.; Rodríguez-Castro, G.A.; Meneses-Amador, A.; Campos-Silva, I.E.; Andraca-Adame, J.; Palomar- Pardavé, M.E.; Gallardo-Hernández, E.A. Micro-Abrasion Wear Resistance of Borided 316L Stainless Steel and AISI 1018 Steel. J. Mater. Eng. Perform. 2017, 26, 5599–5609. [CrossRef] | en_US |
| dc.relation.references | García-León, R.A.; Martinez-Trinidad, J.; Zepeda-Bautista, R.; Campos-Silva, I.; Guevara-Morales, A.; Martínez-Londoño, J.; Barbosa-Saldaña, J. Dry sliding wear test on borided AISI 316L stainless steel under ball-on-flat configuration: A statistical analysis. Tribol. Int. 2021, 157, 106885. [CrossRef] | en_US |
| dc.relation.references | Majumdar, P.; Singh, S.B.; Chakraborty, M.Wear properties of Ti–13Zr–13Nb (wt.%) near β titanium alloy containing 0.5wt.% boron in dry condition, Hank’s solution and bovine serum. Mater. Sci. Eng. C 2010, 30, 1065–1075. [CrossRef] | en_US |
| dc.relation.references | Conradi, M.; Kocijan, A.; Klobˇcar, D.; Podgornik, B. Tribological response of laser-textured Ti6Al4V alloy under dry conditions and lubricated with Hank’s solution. Tribol. Int. 2021, 160, 107049. [CrossRef] | en_US |
| dc.relation.references | García-León, R.A.; Martínez-Trinidad, J.; Campos-Silva, I.; Figueroa-López, U.; Guevara-Morales, A. Wear maps of borided AISI 316L steel under ball-on-flat dry sliding conditions. Mater. Lett. 2021, 282, 128842. [CrossRef] | en_US |
| dc.relation.references | García-León, R.A.; Martínez-Trinidad, J.; Guevara-Morales, A.; Campos-Silva, I.; Figueroa-López, U.Wear Maps and Statistical Approach of AISI 316L Alloy under Dry Sliding Conditions. J. Mater. Eng. Perform. 2021, 30, 6175–6190. [CrossRef] | en_US |
| dc.relation.references | Mischler, S.; Muñoz, A.I.Wear of CoCrMo alloys used in metal-on-metal hip joints: A tribocorrosion appraisal. Wear 2013, 297, 1081–1094. [CrossRef] | en_US |
| dc.relation.references | Rainforth, W.M. The wear behaviour of oxide ceramics—A Review. J. Mater. Sci. 2004, 39, 6705–6721. [CrossRef] | en_US |
| dc.relation.references | Hutchings, I.; Shipway, P. Tribology: Friction and Wear of Engineering Materials, 2nd ed.; Butterworth-Heinemann: Oxford, UK, 2017. | en_US |
| dc.relation.references | Blazquez de Mingo, A. Análisis de la Lubricación Termo-Elastohidrodinámica y Mixta Mediante la Aplicación de Modelos Numéricos (España). 2016. Available online: https://oa.upm.es/43073/1/TFG_ALVARO_LORENZO_BLAZQUEZ_DE_MINGO. pdf (accessed on 29 November 2022). | en_US |
| dc.relation.references | Menezes, P.; Ingole, S.; Nosonovsky, M.; Kailas, S.V.; Lovell, M.R. Tribology for Scientists and Engineers; Springer: New York, NY, USA, 2013. | en_US |
| dc.relation.references | Bhushan, B. Modern Tribology Handbook Volume One; CRC Press: Boca Raton, FL, USA, 2001. | en_US |
| dc.relation.references | Mejía-Caballero, I.; Escobar-Martínez, C.; Palomar-Pardavé, M.; Le Manh, T.; Romero-Romo, M.; Rodríguez-Clemente, E.; Lartundo-Rojas, L.; Campos-Silva, I. On the Corrosion Mechanism of Borided X12CrNiMoV12-3 Steel Immersed in a Neutral Aqueous Solution Containing Chloride and Sulfate Ions. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 2020, 51, 4868–4879. [CrossRef] | en_US |
| dc.relation.references | Yan, Y. Bio-Tribocorrosion in Biomaterials and Medical Implants; Elsevier: New York, NY, USA, 2013. | en_US |
| dc.relation.references | Kato, K.; Adachi, K. Wear of advanced ceramics. Wear 2002, 253, 1097–1104. [CrossRef] | en_US |
| dc.relation.references | Chino-Ulloa, A.; Hernandes-Alejandro, M.; Castrejón-Flores, J.L.; Cabrera-González, M.; Torres-Avila, I.P.; Velázquez, J.C.; Ruiz- Trabolsi, P.A.; Hernández-Sánchez, E. Development of ultra-low friction coefficient films and their effect on the biocompatibility of biomedical steel. Mater. Trans. 2019, 60, 1605–1613. [CrossRef] | en_US |
| dc.identifier.DOI | https://doi.org/10.3390/chemengineering8010022 | en_US |
