Show simple item record

dc.contributor.authorGarcía León, Ricardo Andrés
dc.contributor.authorAfanador García, Nelson
dc.contributor.authorGómez Camperos, July Andrea
dc.coverage.spatialColombiaen_US
dc.date.accessioned2025-09-30T15:36:25Z
dc.date.available2025-09-30T15:36:25Z
dc.date.issued2021-10-13
dc.identifier.issn2311-5521en_US
dc.identifier.urihttps://repositorioinstitucional.ufpso.edu.co/xmlui/handle/20.500.14167/5640
dc.description.abstractLas condiciones de funcionamiento durante el proceso de frenado en un automóvil afectan al contacto tribológico entre la pastilla y el disco de freno, lo que influye en los tiempos y distancias de frenado y, de manera más significativa, en la seguridad del proceso de frenado. Este trabajo matemático tenía como objetivo proporcionar una visualización general del comportamiento mecánico, dinámico y térmico del freno de disco en diferentes condiciones de funcionamiento mediante mapas 2D de la potencia disipada, el tiempo de frenado y la distancia de frenado de un freno de disco con una pala de ventilación tipo N-38. Sin embargo, la energía disipada en el freno de disco en términos de temperatura se analizó teniendo en cuenta la ley de enfriamiento de Newton y cálculos matemáticos a través de teorías clásicas del comportamiento dinámico y mecánico de los frenos de disco. Para ello, el modelo de ajuste de la metodología de superficie de respuesta (RSM) y mínimos cuadrados ponderados por distancia (DWLS) consideró diferentes condiciones de funcionamiento del freno de disco. Los resultados demuestran que los frenos de disco pueden utilizarse eficazmente en condiciones operativas severas con una velocidad de 100 km/h y una temperatura ambiente de 27 ◦C, sin afectar a la seguridad de los ocupantes ni al sistema de frenado y las pastillas. Para las diferentes condiciones evaluadas, la temperatura instantánea alcanza valores de 182,48 y 82,94 ◦C, donde el valor más alto se encontró para una desaceleración total de 100 km/h a 0, lo que representa una distancia de frenado total de entre 44,20 y 114,96 m, dependiendo del ángulo de inclinación (θ). Además, la disipación de energía en los frenos de disco depende en gran medida de la geometría del disco, las palas y las pastillas, el tipo de material, los parámetros y las condiciones de funcionamiento del vehículo, como se puede verificar con cálculos matemáticos para validar la contribución de la eficacia del proceso de frenado durante su funcionamiento real.en_US
dc.language.isoen_USen_US
dc.relationhttps://www.mdpi.com/2311-5521/6/10/363en_US
dc.titleMapas mecánicos y dinámicos de frenos de disco en diferentes condiciones de funcionamientoen_US
dc.title.translatedMechanical and Dynamic Maps of Disc Brakes under Different Operating Conditionsen_US
dc.contributor.cvlacRicardo Andrés García León [0001454975]en_US
dc.contributor.cvlacNelson Afanador García [0000226920]en_US
dc.contributor.cvlacJuly Andrea Gómez Camperos [0001164287]en_US
dc.contributor.googlescholarRicardo Andrés García León [emeJT3sAAAAJ]en_US
dc.contributor.googlescholarNelson Afanador García [8Uk1lqUAAAAJ]en_US
dc.contributor.orcidRicardo Andrés García León [0000-0002-2734-1425]en_US
dc.contributor.orcidNelson Afanador García [0000-0001-5463-2036]en_US
dc.contributor.orcidJuly Andrea Gómez Camperos [0000-0003-3894-144X]en_US
dc.contributor.researchgateRicardo Andrés García León [Ricardo-Garcia-Leon]en_US
dc.contributor.researchgateNelson Afanador García [Nelson-Afanador]en_US
dc.contributor.scopusRicardo Andrés García León [57192545232]en_US
dc.contributor.scopusNelson Afanador García [57202680756]en_US
dc.contributor.scopusJuly Andrea Gómez Camperos [57220550902]en_US
dc.description.abstractenglishThe operating conditions during the braking process in an automobile affect the tribological contact between the pad and disc brake, thus, influencing the times and distances of braking and, in a more significant way, the safety of the braking process. This mathematical work aimed to provide a general visualization of the disc brake’s mechanical, dynamic, and thermal behavior under different operating conditions through 2D maps of the power dissipated, braking time, and braking distance of a disc brake with a ventilation blade N- 38 type. However, the dissipated energy on the disc brake in terms of temperature was analyzed considering Newton’s cooling law and mathematical calculations through classical theories of the dynamic and mechanical behavior of the disc brakes. For this purpose, the Response Surface Methodology (RSM) and Distance Weighted Least Squares (DWLS) fitting model considered different operating conditions of the disc brake. The results demonstrate that the disc brakes can be used effectively in severe operational requirements with a speed of 100 km/h and an ambient temperature of 27 ◦C, without affecting the occupant’s safety or the braking system and the pad. For the different conditions evaluated, the instantaneous temperature reaches values of 182.48 and 82.94 ◦C, where the high value was found for a total deceleration to 100 km/h to 0, which represent a total braking distance of around 44.20 to 114.96 m depending on the inclination angle (θ). Furthermore, the energy dissipation in the disc brakes depends strongly on the disc, blades and pad geometry, the type of material, parameters, and the vehicle operating conditions, as can be verified with mathematical calculation to validate the contribution of the effectiveness of the braking process during its real operation.en_US
dc.subject.proposalMapasen_US
dc.subject.proposalDesgasteen_US
dc.subject.proposalFricciónen_US
dc.subject.proposalFundición grisen_US
dc.subject.proposalTemperaturaen_US
dc.subject.keywordsmapsen_US
dc.subject.keywordsWearen_US
dc.subject.keywordsFrictionen_US
dc.subject.keywordsGray cast ironen_US
dc.subject.keywordsTemperatureen_US
dc.publisher.facultyFacultad ingenieríasen_US
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTen_US
dc.relation.referencesGarcía-León, R.A.; Flórez-Solano, E.; Acevedo-Peñaloza, C. Análisis Termodinámico en Frenos de Disco; ECOE Ediciones: Bogota, Colombia, 2018en_US
dc.relation.referencesRashid, A. Overview of disc brakes and related phenomena-A review. Int. J. Veh. Noise Vib. 2014, 10, 257. [CrossRef]en_US
dc.relation.referencesWahlström, J. A Study of Airborne Wear Particles from Automotive Disc Brakes. Ph.D. Thesis, KTH Royal Institute of Technology, Stockholm, Sweden, 2011en_US
dc.relation.referencesBlau, P.J. Compositions, Functions, and Testing of Friction Brake Materials and Their Additives. Compos. Funct. Test. Frict. Brake Mater. Addit. 2001, 27, 1–38en_US
dc.relation.referencesSN, Descripción y eficacia del sistema de frenado, Kashima University. 2020. Available online: http://kashima.campuseina.com/ mod/book/view.php?id=7679 (accessed on 10 July 2021).en_US
dc.relation.referencesGarcía-León, R.; Flórez-Solano, E.; Suárez-Quiñones, Á. Brake Discs: A Technological Review from Its Analysis and Assessment. Informador. Técnico 2019, 83, 217–234. [CrossRef]en_US
dc.relation.referencesKlapp, J.; Sigalotti, L.D.G.; Medina, A.; López, A.; Ruiz-Chavarría, G. Recent Advances in Fluid Dynamics with Environmental Applications; Springer International Publishing: Cham, Switzerland, 2016.en_US
dc.relation.referencesGarcía-León, R.A. “Evaluación del comportamiento de los frenos de disco de los vehículos a partir del análisis de la aceleración del proceso de corrosión.”. Tesis de pregrado en ingeniería Mecánica, Universidad Francisco de Paula Santander, Ocaña, Colombia, 2014.en_US
dc.relation.referencesGarcía-León, R.A.; Flórez, E. Dynamic analysis of three autoventilated disc brakes. Ing. Investig. 2017, 37, 102–114. [CrossRef]en_US
dc.relation.referencesGarcía-León, R.A.; Solano, E.F. Estudio analítico de la transferencia de calor por convección que afectan los frenos de disco ventilados. Tecnura 2016, 20, 15–30.en_US
dc.relation.referencesSaiz, C.B.; Ingrassia, T.; Nigrelli, V.; Ricotta, V. Thermal stress analysis of different full and ventilated disc brakes. Frat. Integrità Strutt. 2015, 9, 608–621.en_US
dc.relation.referencesRiva, G.; Valota, G.; Perricone, G.; Wahlström, J. An FEA approach to simulate disc brake wear and airborne particle emissions. Tribol. Int. 2019, 138, 90–98. [CrossRef]en_US
dc.relation.referencesGarcía-León, R.A.; Rivera-López, J.E.; Quintero-Orozco, A.; Gutiérrez-Paredes, G.J. Análisis del caudal en un disco de freno automotriz con alabes de ventilación tipo NACA66-209, utilizando velocimetría de imagen de partículas. Inf. Technol. 2019, 83, 10–24.en_US
dc.relation.referencesRivera-López, J.E.; García-León, R.A.; Quintero-Orozco, A.; Diaz-Torrez, E.J.; Gutiérrez-Paredes, G.J.; Echavez-Diaz, R.; ArévaloRuedas, J.H. Thermal and fluid-dynamic analysis of an automotive disc brake with ventilation pillars aerodynamic type. J. Phys. Conf. Ser. 2019, 1386, 012112. [CrossRef]en_US
dc.relation.referencesGarcía-León, R.A.; Echavez-Díaz, R.D.; Flórez-Solano, E. Análisis termodinámico de un disco de freno automotriz con pilares de ventilación tipo NACA 66-209. Inge Cuc 2018, 14, 9–18en_US
dc.relation.references. García-León, R.A.; Acevedo-Peñaloza, C.H.; Rodríguez-Castilla, M.M. Análisis del caudal de aire en un disco de freno automotriz con alabes de ventilación tipo N-38. Sci. Technol. 2019, 24, 385–389.en_US
dc.relation.referencesGarcía-León, R.; Afanador-García, N.; Gómez-Camperos, J. Numerical Study of Heat Transfer and Speed Air Flow on Performance of an Auto-Ventilated Disc Brake. Fluids 2021, 6, 160en_US
dc.relation.referencesWahlström, J.; Matejka, V.; Lyu, Y.; Söderberg, A. Contact Pressure and Sliding Velocity Maps of the Friction, Wear and Emission from a Low-Metallic/Cast-Iron Disc Brake Contact Pair. Tribol. Ind. 2017, 39, 460–470en_US
dc.relation.referencesCandeo, S.; Federici, M.; Leonardi, M.; Straffelini, G. Brake Performance Maps for a Cu-Free Friction Material with Different Scorching Conditions. Tribol. Trans. 2021, 64, 540–550en_US
dc.relation.referencesReddy, S.M.; Mallikarjuna, J.M.; Ganesan, V. Flow and Heat Transfer Analysis of a Ventilated Disc Brake Rotor Using CFD. SAE Tech. Pap. Ser. 2008, 12en_US
dc.relation.referencesGarcía, C.A.J.; Paredes, G.J.G.; López, J.E.R.; Villa, A.L.; Navarrete, J.M.C. Flow Measurement at the Inlet and Outlet Zones of an Automotive Brake Disc with Ventilation Post Pillars, Using Particle Image Velocimetry Technique. In Environmental Science and Engineering; Kluwer Academic Publishers: Mexico City, Mexico, 2016; pp. 323–332.en_US
dc.relation.referencesBelhocine, A.; Bouchetara, M. Thermomechanical behavior of dry contacts in disc brake rotor with a grey cast iron composition. Therm. Sci. 2013, 17, 599–609.vvvvvven_US
dc.relation.referencesAirfoill Tools. Tools to Search, Compare and Plot Airfoils 2017. Available online: http://airfoiltools.com/ (accessed on 21 July 2021).en_US
dc.relation.referencesBelhocine, A.; Afzal, A. FEA Analysis of coupled thermo-mechanical response of grey cast iron material used in brake discs. Rev. Científica 2019, 3, 280–296en_US
dc.relation.referencesIbhadode, A.O.A.; Dagwa, I.M. Development of asbestos-free friction lining material from palm kernel shell. J. Braz. Soc. Mech. Sci. Eng. 2008, 30, 166–173en_US
dc.relation.referencesCengel, Y.A.; Boles, M.E. Termodinamica-Cengel 7th; McGraw Hill: Mexico City, Mexico, 2011.en_US
dc.relation.referencesGarcía-León, R.A.; Florez, E.; Rodriguez-Castilla, M. Thermo-mechanical assessment in three auto-ventilated disc brake by implementing finite elements. J. Phys. Conf. Ser. 2019, 1257, 012019en_US
dc.relation.referencesCengel, Y. Tranferencia de Calor y Masa Tercera Edicion; McGraw Hill: Mexico City, Mexico, 2007.en_US
dc.relation.referencesGarcía-León, R.A.; Guerrero-Gómez, G.; Afanador-García, N. Experimental analysis of the heat transfer generated during the operation of an automotive disc brake. Aust. J. Mech. Eng. 2021, 1–12.en_US
dc.relation.referencesLeon, R.A.G. Estudio térmico en tres frenos de disco ventilados, utilizando el análisis de elementos finitos. DYNA 2017, 84, 19–27.en_US
dc.relation.referencesRiley, W.F.; Sturges, L.D. Engineering Mechanics, Dynamics; Reverte S.A.: Barcelona, Spain, 2005.en_US
dc.relation.referencesStachowiak, G.W. Wear: Materials, Mechanisms and Practice; Wiley: Oxford, UK, 2005.en_US
dc.relation.referencesNaga-Vamsi, K.; Thuppal, V.S. Heat transient transfer analysis of brake disc/pad system. Master of Science in Mechanical Engineering, Blekinge Institute of Technology, Karlskrona, Switzerland, 2016.en_US
dc.relation.referencesLakkam, S.; Puangcharoenchai, P.; Suwantaroj, K. A Study of Heat Transfer on Front and Back Vented Brake Disc Effect on Vibration. Eng. J. 2017, 21, 169–180.en_US
dc.relation.referencesGarcía-León, R.; Martínez-Trinidad, J.; Zepeda-Bautista, R.; Campos-Silva, I.; Guevara-Morales, A.; Martínez-Londoño, J.; Barbosa-Saldaña, J. Dry sliding wear test on borided AISI 316L stainless steel under ball-on-flat configuration: A statistical analysis. Tribol. Int. 2021, 157, 106885.en_US
dc.relation.referencesPulido, H.G.; Salazar, R.D. Análisis y Diseño de Experimentos; McGraw-Hil: Mexico City, Mexico, 2015en_US
dc.relation.referencesStatSoft, Inc. Statistica (Data Analysis Software System), Version 13. Available online: http://www.statsoft.com/ (accessed on 20 July 2020).en_US
dc.relation.referencesKudarauskas, N. Analysis of Emergency Braking of a Vehicle. Transport 2007, 22, 154–159en_US
dc.relation.referencesZamzamzadeh, M.; Saifizul, A.; Ramli, R.; Soong, M. Dynamic simulation of brake pedal force effect on heavy vehicle braking distance under wet road conditions. Int. J. Automot. Mech. Eng. 2016, 13, 3555–3563.en_US
dc.relation.referencesVoller, G.P.; Tirovic, M.; Morris, R.; Gibbens, P. Analysis of automotive disc brake cooling characteristics. Proc. Inst. Mech. Eng. Part D J. Automob. Eng. 2003, 217, 657–666en_US
dc.relation.references. Yevtushenko, A.; Grzes, P. Finite Element Analysis of Heat Partition in a Pad/Disc Brake System. Numer. Heat Transf. Part A Appl. 2011, 59, 521–542.en_US
dc.relation.referencesTalati, F.; Jalalifar, S. Analysis of heat conduction in a disk brake system. Heat Mass Transf. 2009, 45, 1047–1059en_US
dc.relation.referencesGarcía-León, R.A.; Quintero-Quintero, W.; Gomez-Camperos, J.A. Mathematical analysis of the dynamic behavior three motorcycle disc brakes. J. Phys. Conf. Ser. 2020, 1708, 012025.en_US
dc.relation.referencesGarcía-León, R.A.; Acevedo-Peñaloza, C.H.; Rojas-Suarez, J. Análisis Metalográfico y Materiales de Los Frenos de Disco; ECOE: Bogota, Colombia, 2019.en_US
dc.identifier.DOIhttps://doi.org/10.3390/fluids6100363en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record