Mostrar el registro sencillo del ítem

dc.contributor.authorAfanador García, Nelson
dc.contributor.authorGuerrero Gómez, Gustavo
dc.contributor.authorGallardo Amaya, Romel Jesús
dc.coverage.spatialColombiaen_US
dc.date.accessioned2025-09-26T21:38:58Z
dc.date.available2025-09-26T21:38:58Z
dc.date.issued2022-10-01
dc.identifier.issn1742-6588en_US
dc.identifier.urihttps://repositorioinstitucional.ufpso.edu.co/xmlui/handle/20.500.14167/5627
dc.description.abstractSe presenta el registro de temperaturas en diferentes posiciones del proceso de cocción en un horno intermitente para la producción de materiales cerámicos, lo que condujo a la evaluación energética, determinando el calor utilizado para el proceso de cocción de la arcilla y las pérdidas de calor. Además, se llevó a cabo un estudio de las emisiones de gases contaminantes liberados al medio ambiente, tal y como se estipula en el protocolo de control y monitoreo de fuentes fijas. En el balance energético, se detectaron grandes pérdidas de energía en la acumulación de calor en la mampostería de 7,20×10⁶ KJ de la energía suministrada, lo que representa el 16,99 %, y en las paredes del horno de 5,20×10 KJ, lo que representa el 12,17 %. Como resultado, es necesario realizar cambios constructivos y operativos en el funcionamiento de los hornos, lo que conducirá a la recuperación del calor residual en el uso del secado de piezas, el secado y el precalentamiento del aire de combustión, reduciendo el consumo de energía y las emisiones de contaminantes a la atmósfera. La concentración media de partículas liberadas al medio ambiente fue de 1056,60 mg/m3, un 422 % superior a la norma, lo que afecta a la salud de las personas.en_US
dc.language.isoengen_US
dc.relationhttps://iopscience.iop.org/article/10.1088/1742-6596/2153/1/012003/metaen_US
dc.titleEvaluación estructural y física de una viga reforzada mediante galgas extensométricas.en_US
dc.title.translatedStructural and physical evaluation of a reinforced beam using strain gaugesen_US
dc.contributor.cvlacNelson Afanador García [0000226920]en_US
dc.contributor.cvlacGustavo Guerrero Gómez [0001413037]en_US
dc.contributor.cvlacRomel Jesús Gallardo Amaya [0000883590]en_US
dc.contributor.googlescholarNelson Afanador García [8Uk1lqUAAAAJ]en_US
dc.contributor.googlescholarGustavo Guerrero Gómez [La8nZsAAAAAJ]en_US
dc.contributor.googlescholarRomel Jesús Gallardo Amaya [kCbpxb4AAAAJ]en_US
dc.contributor.orcidNelson Afanador García [0000-0001-5463-2036]en_US
dc.contributor.orcidGustavo Guerrero Gómez [0000-0002-4316-7113]en_US
dc.contributor.orcidRomel Jesús Gallardo Amaya [0000-0002-4740-4841]en_US
dc.contributor.researchgateNelson Afanador García [Nelson-Afanador]en_US
dc.contributor.scopusNelson Afanador García [57202680756]en_US
dc.contributor.scopusGustavo Guerrero Gómez [57205119123]en_US
dc.description.abstractenglishThe recording of temperatures in different positions in the firing process in an intermittent kiln to produce ceramic materials is presented, which led to the energy evaluation, determining the heat used for the clay firing process and the heat losses. In addition, a study of the emissions of pollutant gases released into the environment was carried out, as stipulated in the protocol of control, and monitoring of stationary source. In the energy balance, large energy losses were detected in heat accumulation in the masonry of 7.20×106 KJ of the energy supplied, representing 16.99%, and in the kiln walls of 5.20×10 KJ, representing 12.17%. As a result, it is necessary to make constructive and operative changes in the operation of the kilns, which will lead to the recovery of residual heat in the use of drying of parts, drying, and preheating of combustion air, reducing energy consumption and emissions of pollutants into the atmosphere. The average concentration of particulate matter released into the environment was 1056.60 mg/m3 , 422% higher than the standard, affecting people’s health.en_US
dc.subject.proposalDeformaciones en el aceroen_US
dc.subject.proposalViga reforzadaen_US
dc.subject.proposalGalgas extensométricasen_US
dc.subject.proposalEvaluación estructural y físicaen_US
dc.subject.keywordsDeformations in steelen_US
dc.subject.keywordsReinforced beamen_US
dc.subject.keywordsStrain gaugesen_US
dc.subject.keywordsStructural and physical evaluationen_US
dc.publisher.facultyFacultad ingenieríasen_US
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTen_US
dc.relation.referencesHannah R L and Reed S E 1992 Strain Gage Users’ Handbook (London: Chapman and Hall)en_US
dc.relation.referencesHoffmann K 1989 An Introduction to Measurements Using Strain Gages (Darmstadt: Hottinger Baldwin Messtechnik GmbH)en_US
dc.relation.referencesMasri S F, Agbabian M S, Abdel-Ghaffar A M, Higazy M, Claus R O and De Vries M J 1994 Experimental study of embedded fiber-optic strain gauges in concrete structures Journal of Engineering Mechanics 120 1696en_US
dc.relation.referencesMoreno-Robles J and García-De La Oliva J 2012 Determinación de las cargas aplicadas al carril mediante bandas extensométricas Ingeniería Civil 165 123en_US
dc.relation.referencesItasca Consulting Group 2020 Fast Lagrangian Analysis of Continua in 3 Dimensions, FLAC3D V7.0 (Minneapolis: Itasca Consulting Group, Inc.)en_US
dc.relation.referencesHuang Y H, Liu L, Sham F C, Chan Y S and Ng S P 2010 Optical strain gauge vs. Traditional strain gauges for concrete elasticity modulus determination Optik 121 1635en_US
dc.relation.referencesKim J W, Kim K B, Kim J H and Min N K 2018 Bulk-micromachined, SOI-based half-bridge silicon strain gauges for high pressure applications Journal of Micromechanics Microengineering 28 125004-1en_US
dc.relation.referencesPayo I and Feliu V 2014 Strain gauges based sensor system for measuring 3-D deflections of flexible beams Sensors and Actuators A: Physical 217 81en_US
dc.relation.referencesChen X, Topac T, Smith W, Ladpli P, Liu C and Chang F K 2018 Characterization of distributed microfabricated strain gauges on stretchable sensor networks for structural applications Sensors 18 3260en_US
dc.relation.referencesHottinger Baldwin Messtechnik (HBM) 2020 Catman V 5.5.1 (Darmstadt: Hottinger Baldwin Messtechnik))en_US
dc.relation.referencesRegier R and Hoult N A 2014 Distributed strain behavior of a reinforced concrete bridge: Case study Journal of Bridge Engineering 19 05014007:1en_US
dc.relation.referencesSchaefer P L, Barrier G, Chagnon G, Alonso T and Moreau-Gaudry A 2019 Strain gauges based 3D shape monitoring of beam structures using finite width gauge model Experimental Techniques 43 599en_US
dc.relation.referencesForero J 2006 Strain gages. Fundamentos y aplicaciones en resistencia de materiales Avances: Investigación En Ingenierías 4 37en_US
dc.relation.referencesAfanador García N 2019 Quantification of uncertainty in metallic elements subjected to fatigue Journal of Physics: Conference Series 1329 12011:1en_US
dc.relation.referencesGunasekaran K, Annadurai R and Kumar P S 2013 Study on reinforced lightweight coconut shell concrete beam behavior under flexure Materials and Design 46 157en_US
dc.relation.referencesAfanador García N, Guerrero Gómez G and Nolasco Serna C 2021 Reinforced concrete beams subjected to three-point bending using finite element method Journal of Physics: Conference Series 1938 012008:1en_US
dc.identifier.DOI10.1088/1742-6596/2153/1/012003en_US


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem