| dc.contributor.author | Afanador García, Nelson | |
| dc.contributor.author | Guerrero Gómez, Gustavo | |
| dc.contributor.author | Gallardo Amaya, Romel Jesús | |
| dc.coverage.spatial | Colombia | en_US |
| dc.date.accessioned | 2025-09-26T21:38:58Z | |
| dc.date.available | 2025-09-26T21:38:58Z | |
| dc.date.issued | 2022-10-01 | |
| dc.identifier.issn | 1742-6588 | en_US |
| dc.identifier.uri | https://repositorioinstitucional.ufpso.edu.co/xmlui/handle/20.500.14167/5627 | |
| dc.description.abstract | Se presenta el registro de temperaturas en diferentes posiciones del proceso de cocción en un
horno intermitente para la producción de materiales cerámicos, lo que condujo a la evaluación energética,
determinando el calor utilizado para el proceso de cocción de la arcilla y las pérdidas de calor. Además, se llevó a cabo un estudio de
las emisiones de gases contaminantes liberados al medio ambiente, tal y como se estipula en
el protocolo de control y monitoreo de fuentes fijas. En el balance energético, se detectaron grandes pérdidas de energía
en la acumulación de calor en la mampostería de 7,20×10⁶ KJ de la energía suministrada,
lo que representa el 16,99 %, y en las paredes del horno de 5,20×10 KJ, lo que representa el 12,17 %. Como resultado, es
necesario realizar cambios constructivos y operativos en el funcionamiento de los hornos, lo que
conducirá a la recuperación del calor residual en el uso del secado de piezas, el secado y el precalentamiento del
aire de combustión, reduciendo el consumo de energía y las emisiones de contaminantes a la atmósfera.
La concentración media de partículas liberadas al medio ambiente fue de
1056,60 mg/m3,
un 422 % superior a la norma, lo que afecta a la salud de las personas. | en_US |
| dc.language.iso | eng | en_US |
| dc.relation | https://iopscience.iop.org/article/10.1088/1742-6596/2153/1/012003/meta | en_US |
| dc.title | Evaluación estructural y física de una viga reforzada mediante galgas extensométricas. | en_US |
| dc.title.translated | Structural and physical evaluation of a reinforced beam using strain gauges | en_US |
| dc.contributor.cvlac | Nelson Afanador García [0000226920] | en_US |
| dc.contributor.cvlac | Gustavo Guerrero Gómez [0001413037] | en_US |
| dc.contributor.cvlac | Romel Jesús Gallardo Amaya [0000883590] | en_US |
| dc.contributor.googlescholar | Nelson Afanador García [8Uk1lqUAAAAJ] | en_US |
| dc.contributor.googlescholar | Gustavo Guerrero Gómez [La8nZsAAAAAJ] | en_US |
| dc.contributor.googlescholar | Romel Jesús Gallardo Amaya [kCbpxb4AAAAJ] | en_US |
| dc.contributor.orcid | Nelson Afanador García [0000-0001-5463-2036] | en_US |
| dc.contributor.orcid | Gustavo Guerrero Gómez [0000-0002-4316-7113] | en_US |
| dc.contributor.orcid | Romel Jesús Gallardo Amaya [0000-0002-4740-4841] | en_US |
| dc.contributor.researchgate | Nelson Afanador García [Nelson-Afanador] | en_US |
| dc.contributor.scopus | Nelson Afanador García [57202680756] | en_US |
| dc.contributor.scopus | Gustavo Guerrero Gómez [57205119123] | en_US |
| dc.description.abstractenglish | The recording of temperatures in different positions in the firing process in an
intermittent kiln to produce ceramic materials is presented, which led to the energy evaluation,
determining the heat used for the clay firing process and the heat losses. In addition, a study of
the emissions of pollutant gases released into the environment was carried out, as stipulated in
the protocol of control, and monitoring of stationary source. In the energy balance, large energy
losses were detected in heat accumulation in the masonry of 7.20×106 KJ of the energy supplied,
representing 16.99%, and in the kiln walls of 5.20×10 KJ, representing 12.17%. As a result, it is
necessary to make constructive and operative changes in the operation of the kilns, which will
lead to the recovery of residual heat in the use of drying of parts, drying, and preheating of
combustion air, reducing energy consumption and emissions of pollutants into the atmosphere.
The average concentration of particulate matter released into the environment was
1056.60 mg/m3
, 422% higher than the standard, affecting people’s health. | en_US |
| dc.subject.proposal | Deformaciones en el acero | en_US |
| dc.subject.proposal | Viga reforzada | en_US |
| dc.subject.proposal | Galgas extensométricas | en_US |
| dc.subject.proposal | Evaluación estructural y física | en_US |
| dc.subject.keywords | Deformations in steel | en_US |
| dc.subject.keywords | Reinforced beam | en_US |
| dc.subject.keywords | Strain gauges | en_US |
| dc.subject.keywords | Structural and physical evaluation | en_US |
| dc.publisher.faculty | Facultad ingenierías | en_US |
| dc.type.redcol | http://purl.org/redcol/resource_type/ART | en_US |
| dc.relation.references | Hannah R L and Reed S E 1992 Strain Gage Users’ Handbook (London: Chapman and Hall) | en_US |
| dc.relation.references | Hoffmann K 1989 An Introduction to Measurements Using Strain Gages (Darmstadt: Hottinger Baldwin Messtechnik GmbH) | en_US |
| dc.relation.references | Masri S F, Agbabian M S, Abdel-Ghaffar A M, Higazy M, Claus R O and De Vries M J 1994 Experimental study of embedded fiber-optic strain gauges in concrete structures Journal of Engineering Mechanics 120 1696 | en_US |
| dc.relation.references | Moreno-Robles J and García-De La Oliva J 2012 Determinación de las cargas aplicadas al carril mediante bandas extensométricas Ingeniería Civil 165 123 | en_US |
| dc.relation.references | Itasca Consulting Group 2020 Fast Lagrangian Analysis of Continua in 3 Dimensions, FLAC3D V7.0 (Minneapolis: Itasca Consulting Group, Inc.) | en_US |
| dc.relation.references | Huang Y H, Liu L, Sham F C, Chan Y S and Ng S P 2010 Optical strain gauge vs. Traditional strain gauges for concrete elasticity modulus determination Optik 121 1635 | en_US |
| dc.relation.references | Kim J W, Kim K B, Kim J H and Min N K 2018 Bulk-micromachined, SOI-based half-bridge silicon strain gauges for high pressure applications Journal of Micromechanics Microengineering 28 125004-1 | en_US |
| dc.relation.references | Payo I and Feliu V 2014 Strain gauges based sensor system for measuring 3-D deflections of flexible beams Sensors and Actuators A: Physical 217 81 | en_US |
| dc.relation.references | Chen X, Topac T, Smith W, Ladpli P, Liu C and Chang F K 2018 Characterization of distributed microfabricated strain gauges on stretchable sensor networks for structural applications Sensors 18 3260 | en_US |
| dc.relation.references | Hottinger Baldwin Messtechnik (HBM) 2020 Catman V 5.5.1 (Darmstadt: Hottinger Baldwin Messtechnik)) | en_US |
| dc.relation.references | Regier R and Hoult N A 2014 Distributed strain behavior of a reinforced concrete bridge: Case study Journal of Bridge Engineering 19 05014007:1 | en_US |
| dc.relation.references | Schaefer P L, Barrier G, Chagnon G, Alonso T and Moreau-Gaudry A 2019 Strain gauges based 3D shape monitoring of beam structures using finite width gauge model Experimental Techniques 43 599 | en_US |
| dc.relation.references | Forero J 2006 Strain gages. Fundamentos y aplicaciones en resistencia de materiales Avances: Investigación En Ingenierías 4 37 | en_US |
| dc.relation.references | Afanador García N 2019 Quantification of uncertainty in metallic elements subjected to fatigue Journal of Physics: Conference Series 1329 12011:1 | en_US |
| dc.relation.references | Gunasekaran K, Annadurai R and Kumar P S 2013 Study on reinforced lightweight coconut shell concrete beam behavior under flexure Materials and Design 46 157 | en_US |
| dc.relation.references | Afanador García N, Guerrero Gómez G and Nolasco Serna C 2021 Reinforced concrete beams subjected to three-point bending using finite element method Journal of Physics: Conference Series 1938 012008:1 | en_US |
| dc.identifier.DOI | 10.1088/1742-6596/2153/1/012003 | en_US |