Show simple item record

dc.contributor.authorPérez Torrado, Wilson Antonio
dc.contributor.authorEspinel Blanco, Edwin
dc.contributor.authorFlorez Solano, Eder
dc.coverage.spatialColombiaen_US
dc.date.accessioned2025-09-26T16:24:56Z
dc.date.available2025-09-26T16:24:56Z
dc.date.issued2021-06-22
dc.identifier.issn1742-6588en_US
dc.identifier.urihttps://repositorioinstitucional.ufpso.edu.co/xmlui/handle/20.500.14167/5622
dc.description.abstractEn el presente trabajo se aplica el principio de calefacción por suelo radiante para mantener la temperatura dentro de un módulo de cría de lechones. El sistema estudiado utiliza gas generado en un biodigestor para calentar agua que fluye a través de la superficie del suelo y transfiere calor al interior del módulo donde se encuentran los lechones. La carga térmica necesaria se determina a partir de un análisis termodinámico considerando el espacio donde se encuentran los cerdos como volumen de control, que presenta pérdidas de energía por diferencia de temperatura con el exterior a través de paredes y techo, además de las originadas por la renovación de aire, de la misma manera, se determinan las pérdidas de calor durante el flujo de agua caliente a través de las tuberías causadas por la convección entre la tubería y el suelo y por conducción en cada uno de estos materiales. Se determina el caudal y la temperatura del agua necesarios en la línea de suministro para transferir el calor adecuado al interior y mantener el espacio de 33 m² a la temperatura deseada según la etapa de vida de los lechones.en_US
dc.language.isoengen_US
dc.relationhttps://iopscience.iop.org/article/10.1088/1742-6596/1981/1/012005/metaen_US
dc.titleEnergía necesaria para transferir calor a través del suelo radiante de un módulo de guardería de cerdosen_US
dc.title.translatedEnergy required to transfer heat through the radiant floor of a pig nursery moduleen_US
dc.contributor.cvlacWilson Antonio Pérez Torrado [0001775709]en_US
dc.contributor.cvlacEdwin Espinel Blanco [0001200917]en_US
dc.contributor.cvlacEder Flórez Solano [0000668125]en_US
dc.contributor.googlescholarEdwin Espinel Blanco [3ODKG4cAAAAJ]en_US
dc.contributor.googlescholarEder Flórez Solano [kjgjoYkAAAAJ]en_US
dc.contributor.orcidEdwin Espinel Blanco [0000-0003-4479-2874]en_US
dc.contributor.orcidEder Flórez Solano [0000-0003-2527-0413]en_US
dc.contributor.scopusEdwin Espinel Blanco [57209774810]en_US
dc.contributor.scopusEder Flórez Solano [57200310518]en_US
dc.description.abstractenglishIn the present work, the principle of underfloor heating used to maintain the temperature condition inside a pig nursery module is applied. The studied system uses gas generated in a biodigester to heat water that flows through the surface of the floor and transfers heat to the interior of the module where the piglets are located. The necessary thermal load is determined based on thermodynamic analysis considering the space where the pigs are as the control volume, which presents energy losses due to temperature difference with the outside through pairs and roof, in addition to those originated by renewal of air, in the same way, the heat losses during the flow of hot water through the pipes caused by convection between the pipe and the floor and by conduction in each of these materials are determined. The water flow and temperature required in the supply line are determined to transfer adequate heat to the interior and maintain the 33 m² space at the desired temperature according to the life stage of the piglets.en_US
dc.subject.proposalEnergíaen_US
dc.subject.proposalSuelo radianteen_US
dc.subject.proposalTransferir caloren_US
dc.subject.keywordsEnergyen_US
dc.subject.keywordsUnderfloor heatingen_US
dc.subject.keywordsTransfer heaten_US
dc.publisher.facultyFacultad ingenieríasen_US
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTen_US
dc.relation.referencesMerabtine A, Kheiri A, Mokraoui S, Hawila AA 2019 On the estimation of the radiant heating surface temperature and the heat transfer rate calculation: new transient simplified analytical model IOP Conference Series: Materials Science and Engineering 609 052015:1en_US
dc.relation.referencesOpderbeck S. Keßler B, Gordillio W, Schrade H, Piepho H P, Gallmann E 2021Influence of cooling and heating systems on pen fouling, lying behavior, and performance of rearing piglets Agriculture 11 324en_US
dc.relation.referencesPaiano D, Moreira I, Quadros A, Milani N, Nunes M, Machado G, Da Silva A 2017 Efecto de la carga animal y el tipo de piso sobre el rendimiento, la temperatura de la piel y leucograma en la cría de cerdo Revista Medicina Veterinaria y Zootecnia 22(1) 5610en_US
dc.relation.referencesLi T, Merabtine A, Lachi M., Martaj N, Bennacer, R 2021 Experimental study on the thermal comfort in the room equipped with a radiant floor heating system exposed to direct solar radiation Energy 230 120800en_US
dc.relation.referencesEnergy Performance of Building Center 2017 Energy Performance of Buildings - Method for Calculation of the Design Heat Load - Part 1: Space Heating Load, Module M3-3, DIN EN 12831-1 (Rotterdam: Energy Performance of Building Center)en_US
dc.relation.referencesAsociación Española de Normalización 2010 Sistemas de Calefacción y Refrigeración de Circulación de Agua Integrados en Superficies, UNE EN 1264 (Madrid: Asociación Española de Normalización)en_US
dc.relation.referencesHe Y, Li Y, Zheng K, Li G, Guo Z, Xu C 2020 Differential temperature control in heat-integrated pressure-swing distillation for separating azeotropes to deal with operating pressure fluctuations Data in Brief 31 1en_US
dc.relation.referencesGnielinski V 1976 New Equations for heat and mass transfer in turbulent pipe and channel flow International Chemical Engineering 16(2) 359en_US
dc.relation.referencesBergman T, Lavine A, Incropera F, Dewitt D 2011 Fundamentals of Heat and Mass Transfer (USA: John Wiley & Sons)en_US
dc.relation.referencesYoucef A, Saim R 2021 Numerical analysis of the baffles inclination on fluid behavior in a shell and tube heat exchanger Journal Applied Comput. Mech. 7(1) 312en_US
dc.relation.referencesMuhammad A, Hameed M, Chughtai R 2011 Experimental study of natural convection heat transfer from an enclosed assembly of thin vertical cylinders Applied Thermal Engineering 31(1) 20en_US
dc.relation.referencesWang Y, Chang C, Li W, Zhang C 2017 Heat transfer modelling of plate heat exchanger in solar heating system open Journal of Fluid Dynamics 7 426en_US
dc.identifier.DOI10.1088/1742-6596/1981/1/012005en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record