| dc.contributor.author | Arévalo Ruedas, Jose Humberto | |
| dc.contributor.author | Espinel Blanco, Edwin | |
| dc.contributor.author | Florez Solano, Eder | |
| dc.coverage.spatial | Colombia | en_US |
| dc.date.accessioned | 2025-09-24T20:04:00Z | |
| dc.date.available | 2025-09-24T20:04:00Z | |
| dc.date.issued | 2021-09-24 | |
| dc.identifier.issn | 1742-6588 | en_US |
| dc.identifier.uri | https://repositorioinstitucional.ufpso.edu.co/xmlui/handle/20.500.14167/5601 | |
| dc.description.abstract | La vida útil de las herramientas es un factor económico muy importante en la industria metalúrgica,
por lo que cualquier mejora de la herramienta o del material que pueda prolongar la vida útil de las herramientas es
productiva. El deterioro de las herramientas puede causar daños, grietas y vibraciones en las mismas, e incluso
daños en la máquina. El control eficaz del desgaste de las herramientas es muy importante. El control eficaz del desgaste de las herramientas
es de suma importancia. En la actualidad, existen algunas herramientas que pueden obtener las condiciones necesarias
mediante el procesamiento digital de imágenes y estudiar su vida útil en función de su ciclo de trabajo, así como
los tipos de relaciones posibles entre los píxeles de la imagen y los diferentes modos de
funcionamiento, lo que permite la extracción o el aislamiento de los objetos considerados. Este trabajo analiza el
desgaste de la herramienta con la aplicación de matrices bidimensionales con el conjunto de herramientas del
software MATLAB, que permite monitorizar el estado de las plaquitas con la comparación de
imágenes en escala de grises, además, se está estudiando un método de análisis basado en interfaces;
a través de él, los usuarios pueden acceder a la base de datos que se ha implementado, así como a un conjunto de imágenes
utilizadas para verificar las funciones desarrolladas, determinando el desgaste de la herramienta de corte. | en_US |
| dc.language.iso | en_US | en_US |
| dc.relation | https://iopscience.iop.org/article/10.1088/1742-6596/2139/1/012018/meta | en_US |
| dc.title | Análisis de desgaste en herramientas de corte mediante la técnica de procesamiento de imágenes con aplicación de matrices bidimensionales | en_US |
| dc.title.translated | Wear analysis in cutting tools by the technique of image processing with the application of twodimensional matrices | en_US |
| dc.contributor.cvlac | Jose Humberto Arévalo Ruedas [0000056272] | en_US |
| dc.contributor.cvlac | Edwin Espinel Blanco [0001200917] | en_US |
| dc.contributor.cvlac | Eder Flórez Solano [0000668125] | en_US |
| dc.contributor.googlescholar | Jose Humberto Arévalo Ruedas [cmXTAEMAAAAJ] | en_US |
| dc.contributor.googlescholar | Edwin Espinel Blanco [3ODKG4cAAAAJ] | en_US |
| dc.contributor.googlescholar | Eder Flórez Solano [kjgjoYkAAAAJ] | en_US |
| dc.contributor.orcid | Jose Humberto Arévalo Ruedas [0000-0003-4672-4533] | en_US |
| dc.contributor.orcid | Edwin Espinel Blanco [0000-0003-4479-2874] | en_US |
| dc.contributor.orcid | Eder Flórez Solano [0000-0003-2527-0413] | en_US |
| dc.contributor.scopus | Edwin Espinel Blanco [57209774810] | en_US |
| dc.contributor.scopus | Eder Flórez Solano [57200310518] | en_US |
| dc.description.abstractenglish | The useful life of the tools is a very important economic factor in the metal industry,
so any improvement of the tool or material that can extend the useful life of the tools is
productive. Tool deterioration can cause damage, cracking and vibration to the tool, and even
damage to the machine. Effective tool wear control is most important. Effective tool wear control
is most important. At present, there are some tools that can obtain the necessary conditions
through digital image processing, and study their lifespan according to their work cycle, as well
as the types of possible relationships between the pixels of the image and the different modes of
operation, allowing the extraction or isolation of the objects considered. This work analyzes the
wear of the tool with the application of two-dimensional matrices with the toolbox of the
MATLAB software, which allows to monitor the status of the inserts with the comparison of
images in gray scales, in addition, a method of analysis based on interfaces is also being studied;
through it, users can access the database that has been implemented, as well as a set of images
used to verify the functions developed, determining the wear on the cutting tool. | en_US |
| dc.subject.proposal | Análisis de desgaste | en_US |
| dc.subject.proposal | Matrices bidimensionales | en_US |
| dc.subject.proposal | Técnica de procesamiento | en_US |
| dc.subject.keywords | Wear analysis | en_US |
| dc.subject.keywords | Two-dimensional matrices | en_US |
| dc.subject.keywords | Processing technique | en_US |
| dc.publisher.faculty | Facultad ingenierías | en_US |
| dc.type.redcol | http://purl.org/redcol/resource_type/ART | en_US |
| dc.relation.references | Moldovan O G, Dzitac S, Moga I, Vesselenyi T, Dzitac I 2017 Tool-wear analysis using image processing of the tool flank. Symmetry 9(12) 296 | en_US |
| dc.relation.references | Lee Y, Kang T, Kim S, Lee Y, Shin D, Kim J 2021 Improving wear resistance of cBN-based cutting tools using TiN coating on cBN powder surface Colloids and Surfaces A: Physicochemical and Engineering Aspects 631 127758 | en_US |
| dc.relation.references | Dominguez-Caballero J A, Manson G A, Marshall M B 2016 Tool condition monitoring of ceramic inserted tools in high-speed machining through image processing International Journal of Materials and Metallurgical Engineering 10(8) 1427 | en_US |
| dc.relation.references | Prado-Cerqueria M T 2015 Análisis de Desgaste de Herramienta y Optimización de Proceso Mecanizado Mediante Visión Computarizada y Consumo Eléctrico (Vigo: Universidad de Vigo) | en_US |
| dc.relation.references | Thakre A A, Lad A V, Mala K 2019 Measurements of tool wear parameters using machine vision system Modelling and Simulation in Engineering 2019 1876489 | en_US |
| dc.relation.references | Martínez-Arellano G, Terrazas G, Ratchev S 2019 Tool wear classification using time series imaging and deep learning The International Journal of Advanced Manufacturing Technology 104(9) 3647 | en_US |
| dc.relation.references | Peng R, Pang H, Jiang H, Hu Y 2020 Study of tool wear monitoring using machine vision Automatic Control and Computer Sciences 54(3) 259 | en_US |
| dc.relation.references | The MathWorks Inc. 2018 MATLAB R2019b, 9.7.0.1190202 (Massachusetts: The MathWorks Inc.) | en_US |
| dc.relation.references | Saligheh A, Hajialimohammadi A, Abedini V 2020 Cutting forces and tool wear investigation for face milling of bimetallic composite parts made of aluminum and cast iron alloys International Journal of Engineering 33(6) 1142 | en_US |
| dc.relation.references | Mohanta N, Singh R K, Sharma A K 2020 Online monitoring system for tool wear and fault prediction using artificial intelligence International Conference on Contemporary Computing and Applications (Lucknow: Institute of Electrical and Electronics Engineers) | en_US |
| dc.relation.references | D’Addona D M, Teti R 2013 Image data processing via neural networks for tool wear prediction Procedia CIRP 12 252 | en_US |
| dc.relation.references | Hou Q, Sun J, Huang P 2019 A novel algorithm for tool wear online inspection based on machine vision The International Journal of Advanced Manufacturing Technology 101(9) 2415 | en_US |
| dc.relation.references | Wu X, Liu Y, Zhou X, Mou A 2019 Automatic identification of tool wear based on convolutional neural network in face milling process Sensors 19(18) 3817 | en_US |
| dc.relation.references | International Organization for Standardization (ISO) 1989 Tool-life Testing in Milling – Part 1: Face Milling, ISO 8688-1 (Switzerland: International Organization for Standardization) | en_US |
| dc.relation.references | Sharma E, Shivali, Jyotsna, Mahapatra P, Doegar A 2017 Tool condition monitoring using the chain code technique, pixel matching and morphological operations International Conference on Computational Intelligence and Communication Technology (Ghaziabad: Institute of Electrical and Electronics Engineers) | en_US |
| dc.relation.references | Bergs T, Holst C, Gupta P, Augspurger T 2020 Digital image processing with deep learning for automated cutting tool wear detection Procedia Manufacturing 48 947 | en_US |
| dc.relation.references | Ong P, Lee W K, Lau R J H 2019 Tool condition monitoring in CNC end milling using wavelet neural network based on machine vision The International Journal of Advanced Manufacturing Technology 104(1) 1369 | en_US |
| dc.relation.references | Oo H H, Wang W, Liu Z 2020 Tool wear monitoring system in belt grinding based on image-processing techniques The International Journal of Advanced Manufacturing Technology 111(7) 2215 | en_US |
| dc.relation.references | Campillo Fuentes J A 2012 Programación de una Interfaz Gráfica con Diferentes Módulos Para el Tratamiento Digital de Imágenes en Entornos Industriales (Cartagena: Universidad Politécnica De Cartagena) | en_US |
| dc.relation.references | Gu P, Zhu C, Yu Y, Liu D, Tao Z, Wu Y 2021 Evaluation and prediction of drilling wear based on machine vision The International Journal of Advanced Manufacturing Technology 114(7) 2055 | en_US |
| dc.relation.references | Bagga P J, Makhesana M A, Patel K, Patel K M 2021 Tool wear monitoring in turning using image processing techniques Materials Today: Proceedings 44 771 | en_US |
| dc.relation.references | Bagga P J, Makhesana M A, Patel K M 2021 A novel approach of combined edge detection and segmentation for tool wear measurement in machining Production Engineering 15(3) 519 | en_US |
| dc.relation.references | Zhang X, Zheng G, Cheng X, Xu R, Zhao G, Tian Y 2020 Fractal characteristics of chip morphology and tool wear in high-speed turning of iron-based super alloy Materials 13(4) 1020 | en_US |
| dc.relation.references | Prakash M, Kanthababu M, Kumar A, Arun N, Venkadesan V 2020 Identification of tool wear status and correlation of chip morphology in micro-end milling of mild steel (SAE 1017) using acoustic emission signal IOP Conference Series: Materials Science and Engineering 912(1) 032066:1 | en_US |
| dc.relation.references | Sanz A J 2013 Reconocimiento Automático de Formas (Barcelona: Universidad de Barcelona) | en_US |
| dc.relation.references | García-Ordás M T, Alegre E, González-Castro V, Alaiz-Rodríguez R 2017 A computer vision approach to analyze and classify tool wear level in milling processes using shape descriptors and machine learning techniques The International Journal of Advanced Manufacturing Technology 90(5) 1947 | en_US |
| dc.identifier.DOI | 10.1088/1742-6596/2139/1/012018 | en_US |
