| dc.contributor.author | Afanador García, Nelson | |
| dc.contributor.author | Guerrero Gómez, Gustavo | |
| dc.contributor.author | Gallardo Amaya, Romel Jesús | |
| dc.coverage.spatial | Colombia | en_US |
| dc.date.accessioned | 2025-05-23T15:20:58Z | |
| dc.date.available | 2025-05-23T15:20:58Z | |
| dc.date.issued | 2022-01-01 | |
| dc.identifier.issn | 1742-6596 | en_US |
| dc.identifier.uri | https://repositorioinstitucional.ufpso.edu.co/xmlui/handle/20.500.14167/5448 | |
| dc.description.abstract | En este proyecto de investigación se estimaron las deformaciones en el acero de refuerzo longitudinal y transversal de una viga de hormigón armado de 2f½", adicionalmente se midieron los desplazamientos en el centro del claro junto con las cargas, que generaron el agrietamiento de la viga de dimensiones 180 mm×240 mm×3100 mm. Los desplazamientos se realizaron mediante un transductor lineal de desplazamiento variable y las deformaciones se utilizaron galgas extensométricas. Finalmente, las mediciones de la carga aplicada se obtuvieron con un Equipo celda de carga Pinzuar/Modelo-100/20T Las propiedades físico-mecánicas del concreto utilizado se determinaron mediante ensayos de resistencia a la compresión a 28 días y módulo de elasticidad para ello se utilizó un marco portante para soportar la viga en tres puntos para la aplicación de carga. Los datos se recolectaron directamente en el equipo Quantum/X2 y se analizaron con ayuda del software Catman/AP. mayor a 8483 μm/mm, presentando una falla en el centro de la viga debido a la fluencia del acero de tracción para una carga máxima de 3115 Kg. Finalmente, el comportamiento físico de la viga de concreto armado al aplicar una carga permite evaluar y optimizar este tipo de sistemas. | en_US |
| dc.language.iso | eng | en_US |
| dc.relation | https://iopscience.iop.org/article/10.1088/1742-6596/2153/1/012003 | en_US |
| dc.title | Evaluación estructural y física de una viga armada mediante galgas extensométricas | en_US |
| dc.title.alternative | N/A | en_US |
| dc.title.translated | Structural and physical evaluation of a reinforced beam using strain gauges | en_US |
| dc.contributor.cvlac | Nelson Afanador García [0000226920] | en_US |
| dc.contributor.cvlac | Gustavo Guerrero Gómez [0001413037] | en_US |
| dc.contributor.cvlac | Romel Jesús Gallardo Amaya [0000883590] | en_US |
| dc.contributor.googlescholar | Nelson Afanador García [8Uk1lqUAAAAJ] | en_US |
| dc.contributor.googlescholar | Gustavo Guerrero Gómez [La8nZsAAAAAJ] | en_US |
| dc.contributor.googlescholar | Romel Jesús Gallardo Amaya [kCbpxb4AAAAJ] | en_US |
| dc.contributor.orcid | Nelson Afanador García [0000-0001-5463-2036] | en_US |
| dc.contributor.orcid | Gustavo Guerrero Gómez [0000-0002-4316-7113] | en_US |
| dc.contributor.orcid | Romel Jesús Gallardo Amaya [0000-0002-4740-4841] | en_US |
| dc.contributor.researchgate | Nelson Afanador García [Nelson-Afanador] | en_US |
| dc.contributor.researchgate | Romel Jesús Gallardo Amaya [Romel-Gallardo] | en_US |
| dc.contributor.scopus | Nelson Afanador García [57202680756] | en_US |
| dc.contributor.scopus | Gustavo Guerrero Gómez [57205119123] | en_US |
| dc.contributor.scopus | Romel Jesús Gallardo Amaya [57209284871] | en_US |
| dc.description.abstractenglish | In this research project, the deformations in the longitudinal and transverse reinforcing steel of a reinforced concrete beam with 2f½” were estimated. Additionally, the displacements in the center of the span were measured together with the loads, which generated the cracking of the beam of dimensions 180 mm×240 mm×3100 mm. Displacement were performed using a linear variable displacement transducer, and strain gauges were used to measure deformations. Finally, the applied load's measurements were obtained with a load cell Pinzuar/Model-100/20T equipment. The physical-mechanical properties of the concrete used were determined through compressive strength tests at 28 days and modulus of elasticity. For this purpose, a load-bearing frame was used to support the beam at three points for load application. The data was collected directly on the Quantum/X2 equipment and analyzed with the help of the Catman/AP software. The maximum deformations found in the bending test at three points in the reinforced concrete beam were not greater than 8483 μm/mm, presenting a failure in the center of the beam due to the creep of the tensile steel for a maximum load of 3115 Kg. Finally, the physical behavior of the reinforced concrete beam with applying a load allows evaluating and optimizing this kind of systems. | en_US |
| dc.subject.proposal | Estructural | en_US |
| dc.subject.proposal | Evaluación física | en_US |
| dc.subject.proposal | Viga reforzada | en_US |
| dc.subject.proposal | Galgas extensométricas | en_US |
| dc.subject.keywords | Structural | en_US |
| dc.subject.keywords | Physical evaluation | en_US |
| dc.subject.keywords | Reinforced beam | en_US |
| dc.subject.keywords | Strain gauges | en_US |
| dc.publisher.faculty | Facultad ingenierías | en_US |
| dc.type.redcol | http://purl.org/redcol/resource_type/ART | en_US |
| dc.relation.references | Hannah R L, Reed S E 1992 Strain Gage Users’ Handbook (London: Chapman and Hall) | en_US |
| dc.relation.references | Hoffmann K 1989 An Introduction to Measurements using Strain Gages (Darmstadt: Hottinger Baldwin Messtechnik GmbH) | en_US |
| dc.relation.references | Masri S F, Agbabian M S, Abdel-Ghaffar A M, Higazy M, Claus R O, de Vries M J 1994 Experimental study of embedded fiber-optic strain gauges in concrete structures Journal of Engineering Mechanics 120(8) 1696 | en_US |
| dc.relation.references | Moreno-Robles J, García-De La Oliva J 2012 Determinación de las cargas aplicadas al carril mediante bandas extensométricas Ingeniería Civil 165 123 | en_US |
| dc.relation.references | Itasca Consulting Group 2020 Fast Lagrangian Analysis of Continua in 3 Dimensions, FLAC3D V7.0 (Minneapolis: Itasca Consulting Group, Inc.) | en_US |
| dc.relation.references | Huang Y H, Liu L, Sham F C, Chan Y S, Ng S P 2010 Optical strain gauge vs. traditional strain gauges for concrete elasticity modulus determination Optik 121(18) 1635 | en_US |
| dc.relation.references | Kim J W, Kim K B, Kim J H, Min N K 2018 Bulk-micromachined, SOI-based half-bridge silicon strain gauges for high pressure applications Journal of Micromechanics Microengineering 28(1) 125004:1 | en_US |
| dc.relation.references | Payo I, Feliu V 2014 Strain gauges based sensor system for measuring 3-D deflections of flexible beams Sensors and Actuators A: Physical 217 81 | en_US |
| dc.relation.references | Chen X, Topac T, Smith W, Ladpli P, Liu C, Chang F K 2018 Characterization of distributed microfabricated strain gauges on stretchable sensor networks for structural applications Sensors 18(10) 3260 | en_US |
| dc.relation.references | Hottinger Baldwin Messtechnik (HBM) 2020 Catman V 5.5.1 (Darmstadt: Hottinger Baldwin Messtechnik) | en_US |
| dc.relation.references | Regier R, Hoult N A 2014 Distributed strain behavior of a reinforced concrete bridge: case study Journal of Bridge Engineering 19(12) 05014007:1 | en_US |
| dc.relation.references | Schaefer P L, Barrier G, Chagnon G, Alonso T, Moreau-Gaudry A 2019 Strain gauges based 3D shape monitoring of beam structures using finite width gauge model Experimental Techniques 43(5) 599 | en_US |
| dc.relation.references | Forero J 2006 Strain gages. Fundamentos y aplicaciones en resistencia de materiales Avances: Investigación en Ingenierías 4 37 | en_US |
| dc.relation.references | Afanador García N 2019 Quantification of uncertainty in metallic elements subjected to fatigue Journal of Physics: Conference Series 1329(1) 12011:1 | en_US |
| dc.relation.references | Gunasekaran K, Annadurai R, Kumar P S 2013 Study on reinforced lightweight coconut shell concrete beam behavior under flexure Materials and Design 46 157 | en_US |
| dc.relation.references | Afanador García N, Guerrero Gómez G, Nolasco Serna C 2021 Reinforced concrete beams subjected to three-point bending using finite element method Journal of Physics: Conference Series 1938(1) 012008:1 | en_US |
| dc.identifier.DOI | 10.1088/1742-6596/2153/1/012003 | en_US |